Life Fitness CM3 manual Step

STEP 14:

A.Securely assemble one 3-1/2" Pulley (37) to the Pulley Plates (10), using one 3/8 x 1-3/4" Bolt (53) and one 3/8" Lock Nut (63).

Note: Loop the Leg Cable (30) over the Pulley before assembling the Pulley Plates, as shown in Figure 14.

STEP 15:

A.Securely assemble one 3-1/2" Pulley (37) and both Rear Guide Cables (74) to the Base Plates (11), using one 3/8 x 4-1/4" Bolt (68), two 3/8 x 1" Spacers (51) and one 3/8" Lock Nut (63).

Note: Loop the Leg Cable (30) over the Pulley before assembling the Base Plates, as shown in Figure 15.

B.Adjust the Turnbuckle at the top of each Rear Guide Cable (74) to add tension to the Rear Guide Cables

(74)until they are taut.

C.Screw the threaded end of the Leg Cable (30) into the end of the Pulley Bracket (9).

FIGURE 14

FIGURE 15

22