Life Fitness CM3 manual Step

Page 19

FIGURE 11

STEP 11:

A.Loop the Weight Stack Cable (29) around one 3-1/2" Pulley (37).

B.Assemble the 3-1/2" Pulley (37) with the Weight Stack Cable (29) around it to the Boom Plates (14 & 15) using one 3/8 x 4-1/4" Bolt (68), two 3/8" Flat Washers (64), two Guide Cables (65), two 3/8 x 1" Spacers (51) and one 3/8" Lock Nut (63). See Figure 11.

C.Screw the short threaded end of the Weight Stack Cable (29) into the end of the Guide Bracket (42). See Figure 11.

D.Disassemble the Short Cables and the Turnbuckles on the ends of the Guide Cables (65) as shown in Figure 11. Set these pieces aside; the Guide Cables will be reassembled later.

19

Image 19
Contents CM3 GYM System Table of Contents Important Notes Square = 1 X Parts List Cable END Assembly P13-0112-2 P13-0112-1 P13-0112-5 P13-0112-4 Step 68 3/8 X 4-1/4 57 3/8 X 3-3/4 Page CM3 Shroud Option only Igure Step Spring PIN Step Step Step Step Turn Buckle Step Step Step Step Step X 1-1/4 Step Maintenance Warranty Hong Kong