Image IMBE53991 Each Bolt. Do not tighten the Nylon Locknuts yet, En the Nylon Locknuts yet

5. Press a 25mm Round Inner Cap (51) into the end of	5
a Weight Storage Tube (21).
While a second person holds the Middle Crossbar (8)				2
in the position shown, insert two M10 x 70mm Bolts		8
(46) through the bracket on the Weight Storage Tube
(21), the left Brace (2), and the bracket on the Middle				21
Crossbar. Thread an M10 Nylon Locknut (11) onto
					46
each Bolt. Do not tighten the Nylon Locknuts yet.			11
				46	51
6. Press a 25mm Round Inner Cap (51) into the end of	6	51	46
the other Weight Storage Tube (21).
While a second person continues to hold the Middle				21
Crossbar (8), insert two M10 x 70mm Bolts (46)		46
through the bracket on the Weight Storage Tube (21),
the right Brace (2), and the bracket on the Middle
Crossbar. Thread an M10 Nylon Locknut (11) onto				8
each Bolt. Do not tighten the Nylon Locknuts yet.			2
			11
7. Have a second person hold the Top Crossbar (9) in	7
the position shown.
Attach the Top Crossbar (9) to the left Upright (1) with	46		11
two M10 x 70mm Bolts (46), a Small Support Plate		16
(16), and two M10 Nylon Locknuts (11). Do not tight-				9
en the Nylon Locknuts yet.			11
				11
	46
Attach the Top Crossbar (9) to the right Upright (1)
with two M10 x 70mm Bolts (46), a Small Support			Pull-up
Plate (16), and two M10 Nylon Locknuts (11). Do not			Bar	11
tighten the Nylon Locknuts yet.
					16
					46
			1
				1
					46

8