JVC LVT1346-002A manual Troubleshooting, Specification

Page 31

Troubleshooting

•If you are having a problem with your System, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Possible Cause

Action

No sound is heard.

Poor radio reception

The disc tray does not open.

The CD skips.

The CD does not play.

The MP3 disc does not play.

The readout time of the MP3 disc is too long.

The cassette holder cannot be opened.

Unable to record.

Unable to operate the Remote Control.

Operations are disabled.

•Connections are incorrect, or loose.

•Headphones are connected.

•The antenna is disconnected.

•The AM (MW) Loop Antenna is too close to the System.

•The FM Wire Antenna is not properly extended and positioned.

•The AC power cord is not plugged in.

•Tray is locked.

The CD is dirty or scratched.

The CD is upside down.

•No MP3 files are recorded on the disc.

•MP3 files do not have the file extension —

.MP3, .Mp3, .mP3, or .mp3 in thier file names.

•MP3 files are not recorded in the format com- pliant with ISO 9660 Level 1 or Level 2.

The readout time varies with the complexity of the recording configuration.

During tape playing, the power cord was un- plugged.

Cassette record protect tabs are removed.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The built-in microprocessor has malfunctioned due to external electrical interference.

•Check all connections and make corrections. (See pages 4 to 6.)

•Disconnect the headphones.

•Reconnect the antenna securely.

•Change the position and direction of the AM (MW) Loop Antenna.

•Extend FM Wire Antenna to the best recep- tion position.

•Plug the AC power cord.

•Unlock the tray. (See page 17.)

Clean or replace the CD. (See page 27.)

Put the CD in with the label side up.

Replace the disc.

Do not use too many hierarchies and folders when recording. Also, do not record any other types of audio tracks together with MP3 files. (See page 13.)

Plug in the power cord, and turn on the System.

Cover holes on back edge of cassette with tape.

•Remove the obstruction.

•Replace the batteries.

Unplug the System then plug it back in.

Specification

Amplifier

Output Power 50 W per channel, min. RMS, driven into 6 Ω at 1kHz, with no more than 10% total harmonic distortion (IEC268-3) 37 W per channel, min. RMS, driven into

6 Ω at 1kHz, with no more than 0.9% total harmonic distortion (DIN)

Input Sensitivity/Impedance (1 kHz)

AUX IN

400 mV/50 kΩ

Speaker terminals

6 - 16 Ω

Phones

32 Ω - 1 kΩ

Cassette Deck Section

15 mW/ch output into 32 Ω

 

Frequency Response

 

Type I (NORMAL)

63 Hz - 12 500 Hz

Wow And Flutter

0.15% (WRMS)

CD Player

 

CD Capacity

3 CDs

Dynamic Range

83 dB

Signal-To-Noise Ratio

85 dB

Wow And Flutter

Unmeasurable

Tuner

FM Tuner

Tuning Range 87.50 MHz - 108.00 MHz

AM Tuner

Tuning Range (MW) 522 kHz - 1 629 kHz

Unit

Dimensions 270 mm × 308 mm × 410 mm (W/H/D)

Mass Approx. 6.5 kg

Accessories

AM (MW) Loop Antenna (1)

FM Wire Antenna (1)

Remote Control (1)

Batteries R6P (SUM-3)/AA (15F) (2)

Power Specifications

Power Requirements AC 230 V , 50 Hz Power Consumption 110 W (power on mode)

13 W (in Standby mode) Approx. 1.2 W (in ECO mode)

Design and specifications are subject to change without notice.

28

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CA-MXKC2 If in Doubt Consult a Competent Electrician Important for Laser ProductsAbove ALL Introduction FeaturesHow This Manual Is Organized Table of Contents Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlUsing the Supplied Wire Antenna Connecting the FM AntennaUsing the Coaxial Type Connector Not supplied Connecting the Speakers Connecting the AM MW AntennaRear Panel of the Unit Compu Play Connecting External EquipmentConnecting to the Wall Outlet Demo ModeBasic Operations Turning the Power On and OffECO Mode ECO Adjusting the VolumeReinforcing the Bass Sound Active Bass EX Selecting the Sound ModeEntering the Number with the Remote Control Numeric Keys Fade-out Muting Fade MutingOne Touch Radio Using the TunerTuning In a Station Select a station using one of the following methodsPress the 4 or ¢ button to select the preset number Presetting StationsTo Change the FM Reception Mode Using the UnitTo search for a program by PTY codes To show the RDS signals on the displayPress the RDS Mode button within approx Seconds again Receiving FM Stations withTA-- --NEWS-- --INFO OFF To temporarily switch to a broadcast program of your choiceTo stop listening to the program selected by RDS mode To select a program typeMore about MP3 discs Using the CD PlayerWhen playing a CD-R or CD-RW For MP3 discsTo Load CDs Changing the MP3 Playback ModeTo Unload CDs To Select a Track Basics of Using the CD Player- Normal PlayTo Select a Group For MP3 Group mode only To Play CDsTo Exit and Re-enter Program Play Programming the Playing Order of the TracksTo Make a Program To Play the Program You Have MadeTray Lock Function Random PlayRepeating Tracks Resume Play for MP3 DiscClose the cassette holder gently Using the Cassette Deck Listening to a TapePlaying a Tape To Fast-Wind a TapeProgram CD REC Start Dubbing Tape B Random Tape a Using the Cassette Deck RecordingThings To Know Before You Start Recording Tape a REC START/STOP Tape B Push OpenTo Record Any Sound Source to Tape Standard RecordingCD Synchro Recording Tape to Tape Recording DUB- BingListening to the External Equipment Using an External EquipmentAUX Setting the Clock Using the TimersFixing the Clock Selecting the music source Setting the Daily TimerSetting the OFF time Example Setting the on time ExamplePress the CANCEL/DEMO button on the Unit Setting the REC Recording TimerTurning the Daily Timer On and Off Setting the volume levelSelect the preset station for recording Turning the REC Recording Timer On and OffSetting the on time you want the System to turn on Setting the OFF time you want the System to turn offWait for 5 seconds Setting the Sleep TimerTimer Priority During playback a source, press the Sleep buttonCare And Maintenance Specification Troubleshooting0405NYMCREBET CA-MXKC2 Compact Component SystemAbove ALL SP-MXKC2Daily operations and maintenance PrecautionsSpecifications Before connectingCaractéristiques VorsichtsmaßnahmenPrécautions Technische DatenPrecauciones VoorzorgenTechnische Gegevens Especificaciones Försiktighetsåtgärder PrecauzioniSpecificazioni Tekniska Data Tekniset Tiedot ForholdsreglerVarotoimia Specifikationer

LVT1346-002A specifications

The JVC LVT1346-002A is a popular and sophisticated speaker system designed to deliver high-quality audio performance for various multimedia applications. This speaker model combines cutting-edge technology with sleek design, catering to both casual listeners and audio enthusiasts alike.

One of the standout features of the JVC LVT1346-002A is its impressive sound quality. The system is equipped with advanced drivers that ensure a clear and balanced sound across a wide frequency range. This results in rich bass tones, detailed mids, and crisp highs, allowing users to experience their favorite music, movies, and games in a whole new way.

The speaker system incorporates JVC's proprietary sound-enhancing technologies, designed to optimize audio playback. Technologies such as Digital Signal Processing (DSP) are utilized to improve clarity and prevent distortion, especially at higher volumes. This feature ensures that listeners can enjoy their audio content without compromising on quality, even in dynamic scenes during action-packed movies or while listening to intricate musical compositions.

In terms of connectivity, the JVC LVT1346-002A offers versatile options, allowing users to easily integrate it into their existing home entertainment systems. The speaker features standard wiring as well as compatibility with various audio devices, including televisions, smartphones, and computers. This flexibility ensures that users can enjoy high-fidelity sound from multiple sources without hassle.

The design of the JVC LVT1346-002A is both stylish and functional. Its sleek aesthetics complement modern home décor, and the compact size of the speakers allows for easy placement in various settings. Whether mounted on shelves or placed on stands, the system can adapt to different environments while maintaining optimal sound dispersion.

Additionally, the JVC LVT1346-002A is built with durability in mind. The materials used in its construction are designed to withstand the test of time, ensuring that users can rely on the system for years without degradation in sound quality. The speaker also features user-friendly controls, making it convenient for users to adjust settings and enjoy an enhanced audio experience.

In conclusion, the JVC LVT1346-002A speaker system represents an excellent choice for anyone seeking high-quality audio performance combined with innovative features and elegant design. With its range of technologies aimed at improving sound clarity, flexibility in connectivity, and durable build, it stands out as a reliable option for enhancing any audio experience.
Top Page Image Contents