JVC LVT1364-006B Using an External Equipment, English, Tuning in to a Preset Station, or “AM.”

English

3 Press PRESET GROUP or	UP
	GROUP
	PRESET
PRESET GROUP to select a
preset number, then press SET.	PRESET
	DOWN
	GROUP

The preset station is stored in memory.

•Even if you do not press SET, the station will automatically be stored on the selected preset number 5 seconds later.

MHz
PRGM
You can also use the number	1	2	3
button(s) to select a preset number.
• In this case, you do not have to	4	5	6
press SET.
Ex.: To select a preset number 5,	7	8	9
press 5.			OVER
To select a preset number 15, press		0

OVER, then press 1, 5.

To select a preset number 20, press OVER, then press 2, 0.

Tuning in to a Preset Station

On the remote control ONLY:

1 Press FM/AM to select either “FM” FM/AM

or “AM.”

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

2 Press PRESET GROUP or	GROUP
	UP
	PRESET
PRESET GROUP repeatedly
to select a preset number.	PRESET
	DOWN
	GROUP

To tune in to a preset station directly using the number buttons

4 To preset more stations, repeat steps 1 to 3 above, allocating a different preset number to each station.

•Storing a new station on an already assigned number erases the previously stored one.

When you unplug the AC power cord or if a power failure occurs

The preset stations will remain in the unit.

On the remote control ONLY:

Pressing the number button(s) allows you to select the preset number you want. Ex.: For preset number 5, press 5.

For preset number 15, press OVER, then press 1, 5.

For preset number 20, press OVER, then press 2, 0.

1 2 3

4 5 6

7 8 9

OVER

0

Using an External Equipment

Listening to the External Equipment

You can listen to the external equipment such as MD recorder, cassette deck, or other auxiliary.

•First, make sure that the external equipment is properly connected to the unit. (See page 7.)

1 Set the volume level to the minimum position.

2 Press AUX. AUX

“AUX” appears on the display.

3 Start playing the external equipment.

4 Adjust the volume level to the level you want to listen to.

To exit AUX mode, select other source.

For operation of the external equipment

Refer to its instructions.

17