JVC LVT1364-006B manual Programming the Track Playing Order —ProgramPlay, Basic Disc Operations

To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit’s pivot lightly.

•If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start.

•If no disc is inserted

“NO DISC” appears on the display.

DO NOT open the disc cover by hand as it will be damaged.

To locate a particular point in a track

During play, press and hold ¢ or 4 (or	PRESET
	UP
UP ¢ or DOWN 4 on the unit).	GROUP

DOWN

• ¢ (UP ¢): Fast-forwards the PRESET

GROUP

tracks.

•4 (DOWN 4): Fast-reverses the tracks.

Programming the Track Playing Order —Program Play

You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks.

Basic Disc Operations

While playing a disc, you can do the following operations.

To stop playing for a moment

During play, press CD 3/8.	CD
	3/8
While pausing, the elapsed playing time flashes on
the display.

To resume playing, press CD 3/8 again.

To go to another track

Before or during play, press ¢ or 4 (or			UP
		PRESET
		GROUP
UP ¢ or DOWN 4 on the unit)
repeatedly.		PRESET
		DOWN
		GROUP
• ¢ (UP ¢):	Skips to the beginning
	of the next or succeeding
	tracks.

•4 (DOWN 4): Goes back to the beginning of the current or previous tracks.

To go to another track directly using the number buttons

On the remote control ONLY:

1 Place a disc.

•If the current source is not the CD player, press CD 6, then 7 before going to the next step.

2 Press PROGRAM. PROGRAM

The PRGM (program) indicator starts flashing on the display.

PRGM

3 Press ¢ or 4 to select the		UP
		GROUP
		PRESET
track number, then press
PROGRAM.		GROUP
		DOWN
		PRESET
	Program step
Track number	number
		PROGRAM
PRGM

On the remote control ONLY:

Pressing the number button(s) before or	1	2	3
during play allows you to start playing the
track number you want.	4	5	6
Ex.: For track number 5, press 5.
For track number 15, press OVER,	7	8	9
then press 1, 5.

You can also use the number button(s) to select a track number.

•For the operation of the number buttons, see “To go to another track directly using the number buttons” on the left column.

1 2 3

4 5 6

7 8 9

OVER

0

	OVER
For track number 20, press OVER,	0
then press 2, 0.
(For MP3 disc only)
For track number 20, press OVER, then
press 0, 2, 0.

For track number 156, press OVER, then press 1, 5, 6.

When you are programming from MP3 disc Pressing PRESET GROUP or PRESET GROUP selects the first track of each group.

4 Repeat step 3 to program other tracks you want.

11