JVC 0405MWMMDWBET, LVT1344-003A, SP-MXGC5 manual Maintenance, Cleaning the unit, Handling discs

Page 26

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

Cleaning the unit

Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Avoid the following since they may cause damage to the unit.

-DO NOT wipe it with a hard cloth.

-DO NOT wipe it strong.

-DO NOT wipe it with thinner or benzine.

-DO NOT apply any volatile substance such as insecticides to it.

-DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

Do not touch the shiny surface of the disc, or bend the disc.

Put the disc back in its case after use to

prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

23

Image 26
Contents Instructions 24.0 kg Important for Laser Products About This Manual PrecautionsIntroduction Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel See pages in the parentheses for details Front PanelDisplay Window Rhythm AX button 11 s Beep button Volume +/- button Remote ControlRemote Control Unpacking Connecting AntennasGetting Started FM antennaAM antenna Connecting SpeakersRelease the finger from the clamp Saving the Power Consumption while on Standby-ECO mode Connecting Other EquipmentCanceling the Display Demonstration On the unit onlyConnect the unit to the PC using a USB cable not supplied Connecting a ComputerSelect USB in as the source Set the volume to minimum USB drivers are installed automaticallyCommon Operations Turning On or Off the PowerSetting the Clock Selecting the SourcesOn the remote control Adjusting the VolumeEnjoying the Powerful Sound-RHYTHM AX Reinforcing the Bass SoundSelecting the Sound Modes Turning On or Off the Key-touch TonePress SET/RESUME on the remote control again Tuning in to a Station-Auto SearchTuning in to a Preset Station Presetting Stations Listening to the RadioContinuous Playback Playing Back CDsLoading discs When the MP3 playback mode is the Group mode See also Track modeGroup mode To stop during play, press For Audio CDBasic CD Operations To go to another track directly using the number buttons Changing the MP3 Playback ModeOn the remote control only Turning On or Off the Resume Play for MP3 DiscPress the number buttons to select the track number On the remote control only Load discsProgramming the Playing Order of the Tracks -Program Play Program other tracks you wantPlaying at Random-Random Play To stop and cancel Random play, pressTo cancel the prohibition and unlock the carrousel, press Repeating Tracks or CDs-Repeat PlayPress CLOCK/TIMER again Using the TimersUsing Daily Timer Set the on-time you want the unit to turn onUsing Sleep Timer Troubleshooting SymptomHandling discs MaintenanceCleaning the unit Specifications MX-GC5 Compact Component System