JVC 0405MWMMDWBET, LVT1344-003A manual Using the Timers, Using Daily Timer, Press CLOCK/TIMER again

Page 23

Using the Timers

Continued

There are two timers available—Daily Timer and Sleep

2 Press CLOCK/TIMER again.

Timer.

Before using the timers, you need to set the clock built in the

“ON TIME” appears for 1 second, then the

unit enters on-time setting mode.

unit. (See “Setting the Clock” on page 10.)

 

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (on standby).

Daily Timer works everyday unless you cancel it.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

When using the tuner as the source to play:

Make sure to preset a station you want to play. (See page 13.)

When using a disc as the source to play:

Make sure there is a disc you want to play on the currently selected disc number tray.

When using the external component as the source to play:

Set the timer equipped with the external component at the same time.

On the remote control ONLY:

1 Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.

The indicator lights up and the DAILY

(daily timer) indicator starts flashing on the display.

Each time you press the button, the clock/timer setting modes change as follows:

DAILY ON TIME (Daily Timer)

Canceled CLOCK (See page 10.)

3 Set the on-time you want the unit to turn on.

1) Press ¢/¡ or 4/1 to set the hour, then SET/RESUME.

2)Press ¢/¡ or 4/1 to set the

minute, then SET/RESUME. “OFF TIME” appears for 1 second, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1)Press ¢/¡ or 4/1 to set the hour, then SET/RESUME.

2)Press ¢/¡ or 4/1 to set the

minute, then SET/RESUME.

The unit enters source selecting mode.

5 Press ¢/¡ or 4/1 to select the source to play, then SET/RESUME.

Each time you press ¢/¡ or 4/1, the source changes as follows:

TUNER FM TUNER AM

AUX IN CD

TUNER FM : tunes in to a specified preset FM station.

=go to step 6.

TUNER AM : tunes in to a specified preset AM station.

 

= go to step 6.

CD*

: plays a disc on a specified disc tray from

 

the first track.

 

= go to step 6.

AUX IN

: plays an external source.

=go to step 7.

*If the selected disc tray is empty, the next disc tray is selected. If all the disc trays are empty, the last tuned FM or AM station is selected.

20

Image 23
Contents Instructions 24.0 kg Important for Laser Products About This Manual PrecautionsIntroduction Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsFront Panel See pages in the parentheses for details Front PanelDisplay Window Rhythm AX button 11 s Beep button Volume +/- button Remote ControlRemote Control FM antenna Connecting AntennasGetting Started UnpackingAM antenna Connecting SpeakersRelease the finger from the clamp On the unit only Connecting Other EquipmentCanceling the Display Demonstration Saving the Power Consumption while on Standby-ECO modeUSB drivers are installed automatically Connecting a ComputerSelect USB in as the source Set the volume to minimum Connect the unit to the PC using a USB cable not suppliedSelecting the Sources Turning On or Off the PowerSetting the Clock Common OperationsReinforcing the Bass Sound Adjusting the VolumeEnjoying the Powerful Sound-RHYTHM AX On the remote controlTurning On or Off the Key-touch Tone Selecting the Sound ModesListening to the Radio Tuning in to a Station-Auto SearchTuning in to a Preset Station Presetting Stations Press SET/RESUME on the remote control againContinuous Playback Playing Back CDsLoading discs To stop during play, press For Audio CD Track modeGroup mode When the MP3 playback mode is the Group mode See alsoBasic CD Operations Turning On or Off the Resume Play for MP3 Disc Changing the MP3 Playback ModeOn the remote control only To go to another track directly using the number buttonsProgram other tracks you want On the remote control only Load discsProgramming the Playing Order of the Tracks -Program Play Press the number buttons to select the track numberRepeating Tracks or CDs-Repeat Play To stop and cancel Random play, pressTo cancel the prohibition and unlock the carrousel, press Playing at Random-Random PlaySet the on-time you want the unit to turn on Using the TimersUsing Daily Timer Press CLOCK/TIMER againUsing Sleep Timer Symptom TroubleshootingHandling discs MaintenanceCleaning the unit Specifications MX-GC5 Compact Component System