ASSEMBLY
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 2
STEP 3
Connect Seat Pad (9) to Seat Support Frame (4) using Bolts (17) and Washers (18).
Slide Pin (10) down into Main Frame (1) and secure with Washer (13) and Nylon Lock Nut (14). Connect Spring (24) between Main Frame (1) and Pin (10).
STEP 4 Connect Seat Support Frame (4) to Main Frame (1) using Bolt (12), Washers (13) and Nylon Lock Nut (14). Seat can then be adjusted by pulling Pin (10) toward rear of unit.