Assembly
Step 5:
A)Locate wheel kit and take out of box. Wheel kit will already include one Bolt (2D1E), two Washers (0J4J), one Wheel (015W) and one Nut (0KMV). Tighten Nut if needed.
B)Attach wheel kit to the front of the frame. Tighten Bolt on the wheel kit.
Note: You will need a 17 mm wrench in order to complete this step.Wrench is provided.
Figure 5
Congratulations!
You have completed the assembly of your new EVOLUTION Elliptical!.
9