Assembly of Alliance
920 Recumbent Bike
REMOVE ALL SECURITY TAPE AND WRAPPING
BEFORE BEGINNING.
1
1.Attach foot tubes (4) to the frame by using the carriage bolts (44), flat washers (50) and cap nuts ( 45) provided. Make sure the foot tube with wheels is assembled onto the front of the unit.
2a. Attach the rear handlebar (22) to the seat carriage (3) with the flat washers (50) and screws (79) pro- vided. Connect the seat cushions (9,10) to the seat carriage (3) with the washers (78) and screws (80).
2a
2b
2b. First remove the support tube (24), from the main frame (1). Slide the assembled seat carriage onto the carriage tube (16).
4 | 5 |