Common Operations
Turning On or Off the Power
To turn on the unit, press | so that the standby | ECO |
lamp goes off.
To turn off the unit (on standby), press |
| ECO |
again so that the standby lamp lights up. |
|
|
A little power is always consumed even while the unit is on standby.
To save the power consumption while on | ECO |
standby, press ECO. All the indicators in the display window
including the display demonstration disappears.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
When you unplug the AC power cord or if a power failure occurs
The clock is reset to ÒÐ Ð : Ð ÐÓ soon, while the tuner preset stations (see page 12) will be erased in a few days.
Setting the Clock
Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.
On the remote control ONLY:
1 Press CLOCK/TIMER.
ÒCLOCKÓ flashes on the display, then Ò0:00Ó appears. The hour digit starts flashing.
2 Press ¢/¡ or 4/1 to adjust the hour, then press SET.
The minute digits start flashing on the display.
¥If you want to correct the hour after pressing SET, press CANCEL. The hour digits start flashing again.
3 Press ¢/¡ or 4/1 to adjust the minute, then press SET.
To check the clock time
Press DISPLAY while playing any source.
¥To return to the source indication, press DISPLAY.
While the time indication appears on the display
If you press any button or turn any control, the time indication returns to the source indication.
To adjust the clock again
If the clock has been previously adjusted, you need to press CLOCK/TIMER repeatedly until ÒCLOCKÓ is selected.
¥Each time you press the button, the clock/timer setting modes change as follows:
DAILY 
TIMER 
CLOCK
(Daily Timer)
Canceled 
If there is a power failure
The clock loses the setting and is reset to ÒÐ Ð : Ð Ð.Ó You need to set the clock again.
Selecting the Sources
To listen to the radio, press FM/AM. (See page 12.) To playback CDs, press CD 3. (See pages 13 Ð 19.)
To select the external equipment as a source, press USB/ AUX.
CD 
FM/AM
USB/AUX
When you press the play button for a particular source
(CD 3, FM/AM, USB/AUX), the unit turns on (and the unit starts playing the source if it is ready).
9