JVC 0406KMMBICSAM, LVT1541-004A Connecting to Your PC, Turn on your PC, and close all the running

Page 23

Playing Back from the External Source

Continued

 

 

Connecting to Your PC

This system is equipped with a USB terminal on the front panel. You can connect your PC to this terminal and enjoy sound reproduced through your PC.

When you connect your PC for the first time, follow the procedures below.

¥ The system cannot send any signal or data to your PC.

IMPORTANT

Always set volume to VOL MIN when connecting or disconnecting the other equipment.

DO NOT turn off the unit and disconnect the USB cable while installing drivers and playing back, and

for several seconds after your PC recognizes the unit.

How to install the USB drivers

The following procedures are described using the Microsoft Windows¨ XP. If your PC is running on a different version of Windows, the screen shown on your PCÕs monitor will differ from the ones described in the following procedures.

1

Turn on your PC, and close all the running

 

applications.

 

2

Turn on the unit and press USB/

USB/AUX

AUX repeatedly to select USB.

3 Connect the unit to the PC using a USB cable (not supplied).

(this unit)

¥Use ÒUSB series A plug to B plugÓ cable when connecting.

4 The USB drivers are installed automatically.

¥If the USB drivers are not installed automatically, install the USB drivers manually following the instructions displayed on the PCÕs monitor.

5 Check if the drivers are correctly installed.

1Open the Control Panel on your PC: Select [Start] = [Settings] = [Control Panel]

2Click [System] = [Hardware] = [Device Manager] = [Sound, video and game controllers] and [Universal Serial Bus controllers]

¥The following window appears, and you can check whether the drivers are installed.

*The installed drivers are shown only when the unit is connected to the PC.

To playback sounds stored on the PC

Refer the manuals supplied with the sound reproduction application installed in the PC.

¥Noise and static electricity may stop the sound through the USB connection. In this case, do the following operations:

ÐDisconnect and connect the USB cable again.

ÐRestart the music software on your PC.

ÐTurn off and on the unit.

¥Windows¨ 98SE, Windows Me, Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation.

20

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Instructions Important for Laser Products SP-MXC55 CA-MXC55 About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsDisplay Window Front PanelRemote Control Remote ControlUnpacking Connecting AntennasGetting Started For better reception of both FM and AM Connecting SpeakersRelease the finger from the clamp AM antennaOn the unit only Canceling the Display DemonstrationTo cancel the display demonstration When you press other buttonsSelecting the Sources Turning On or Off the PowerSetting the Clock Common OperationsReinforcing the Bass Sound Adjusting the VolumeEnjoying the Powerful Sound-SOUND Turbo To trun off the volume level temporarilyPress and hold Beep for more than 2 seconds Selecting the Sound ModesTurning On or Off the Key-touch Tone Beep Listening to the Radio Tuning in to a Station-Auto SearchPresetting Stations Tuning in to a Preset StationPlaying Back CDs-All Disc and One Disc Playing Back CDsLoading CDs CD playback sequence For Audio CDTo stop playback, press To remove the disc, pressAdvanced CD Operations If your entry is ignored To go to another track directly using the number buttonsWhen the MP3/WMA playback mode is the Album mode To go to another album on an MP3/WMA discPress MP3/WMA Mode before or during playing an MP3/WMA disc Changing the MP3/WMA Playback ModeTrack mode Album modePress CD Programming the Playing Order of the Tracks --Program PlayPress Program so that Program appears on the display Program other tracks you wantProhibiting Disc Ejection--Carrousel Lock Playing at Random--Random PlayRepeating Tracks or CDs--Repeat Play Turn on your PC, and close all the running Connecting to Your PCUSB drivers are installed automatically Check if the drivers are correctly installedStart playback of the connected audio equipment Connecting the Other Audio EquipmentTurn on the audio equipment Turn on the unit and press USB/AUX repeatedly to selectSet the on-time you want the unit to turn on Using the TimersUsing Daily Timer How Daily Timer actually worksUsing Sleep Timer Handling discs MaintenanceCleaning the unit To clean the discSymptom TroubleshootingSpecifications MX-C55 Compact Component System
Top Page Image Contents