Teledyne 3300TB operating instructions Installation Checklist

Trace Oxygen Analyzer Installation 3

3.5Installation Checklist

Before connecting the instrument to the power source and turning it on, make sure you have:

•Correctly installed the Sample and Exhaust gas lines

•Checked for leaks

•Set the sample pressure to 5–10 psig (34.5 - 68.9 kPa), nominal (for non-vacuum service units)

•Set the flow

Once the above checks have been made, you can connect to the power source. The instrument is now ready for operation.

Teledyne Analytical Instruments 3-7