PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts may have been
| M8 Washer (34) | |
25mm Round Inner Cap (47) | ||
38mm x 76mm Inner Cap (52) | M4 x 16mm Screw (53) | |
| ||
M6 Washer (45) | M6 x 16mm Screw (44) | |
M10 Washer (49) | ||
| M6 x 38mm Bolt (46) | |
M10 Nylon Locknut (37) |
| |
50mm Square Inner Cap (27) | M10 x 45mm Bolt (43) | |
| ||
M8 Nylon Locknut (35) | M8 x 50mm Bolt (48) | |
| ||
M4 x 16mm Flat | M8 x 58mm Bolt (33) | |
Head Screw (51) | ||
| ||
45mm Square Inner Cap (26) | M6 x 63mm Screw (50) | |
| M10 x 68mm Bolt (41) | |
19mm Round Inner Cap (24) |
| |
M10 x 95mm Bolt (40)
25mm Square Inner Cap (28)
M10 x 156mm Bolt (39)