PART | R0109A | ||||
Key No. | Qty. | Description | Key No. | Qty. | Description |
1 | 1 | Upright | 29 | 4 | M8 Locknut |
2 | 1 | Standing Platform | 30 | 4 | 3/8" Washer |
3 | 1 | Console | 31 | 4 | 3/8" Hex Nut |
4 | 1 | Standing Platform Plate | 32 | 4 | 3/8" Locknut |
5 | 1 | Base | 33 | 17 | M8 Flat Washer |
6 | 1 | Small Base Damper Mat | 34 | 17 | SW8 Split Washer |
7 | 1 | Large Base Damper Mat | 35 | 4 | M8 Hex Nut |
8 | 1 | Mat | 36 | 1 | Small Console Pad |
9 | 1 | Right Handlebar | 37 | 1 | Large Console Pad |
10 | 1 | Left Handlebar | 38 | 2 | M6 x 15mm Screw |
11 | 2 | Handlebar Cover | 39 | 13 | M8 x 16mm Allen Bolt |
12 | 1 | Motor | 40 | 12 | M5 Flat Washer |
13 | 3 | Foot Pad | 41 | 12 | M5 x 15mm Allen Bolt |
14 | 6 | Shock Absorber | 42 | 12 | SW5 Split Washer |
15 | 6 | Rubber Spacer | 43 | 1 | Foam Pad |
16 | 1 | Controller | 44 | 2 | SW6 Split Washer |
17 | 1 | Switching Bracket | 45 | 2 | M6 Flat Washer |
18 | 1 | Power Switch | 46 | 1 | Lower Wire |
19 | 2 | Base Damper Pad | 47 | 1 | Upper Wire |
20 | 3 | Grommet | 48 | 2 | Zip Tie |
21 | 2 | Handlebar Cap | 49 | 1 | Power Cord |
22 | 2 | 50 | 11 | M4 x 12mm Screw | |
23 | 10 | M8 x 45mm Screw | 51 | 4 | Threaded Spacer |
24 | 2 | Bracket | * | – | Hand Strap |
25 | 4 | 3/8" x 50mm Carriage Bolt | * | – | Hex Key |
26 | 8 | * | – | Userʼs Manual | |
27 | 4 | M8.2 Nylon Washer | * | – | Exercise Chart |
28 | 4 | Spring |
|
|
|
Note: Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. *These parts are not illustrated.
10