Fitness Quest Brutus 655 manual Seat Cushion Left Oblique Frame Washer

FIGURE 7

Step 31. Attach 2” SQUARE RUBBER BUMPER (81) to LEFT SEAT CUSHION FRAME (15) with M10 x 25mm SCREW (47).

Step 32. Attach LEFT SEAT CUSHION FRAME (15) to LEFT OBLIQUE FRAME (4) with 3/8” x 2-5/8” HEX BOLTS (53) 3/8” WASHERS (62) and 3/8” LOCKNUTS (67).

Step 33. Attach SEAT CUSHION (18) to LEFT SEAT CUSHION FRAME (15) with M8 x 15mm HEX BOLTS (49) and M8 WASHERS (64).

Step 34. Push 1-3/8” x 2” END CAP (72) into ends of CONNECTOR TUBES (16).

Step 35. Attach CONNECTOR TUBES (16) to LEFT SEAT CUSHION FRAME (15) and LEFT BASE BEAM (6) with 3/8” x 4-1/2” HEX BOLTS (57),

3/8” WASHERS (62) and 3/8” LOCKNUTS (67).

		18
		SEAT				4
		CUSHION				LEFT
				62		OBLIQUE
						FRAME
				3/8”
				WASHER
			53
	73	3/8” x 2-5/8”
		HEX BOLT				62
	1” x 2”
						3/8”
	END PLUG			15
						WASHER
		81		LEFT
		2”		SEAT
		SQUARE	CUSHION
		RUBBER	FRAME
		BUMPER		64
57				M8
				WASHER
3/8” x 4-1/2”
	62
HEX BOLT
	3/8”					67
WASHER
						3/8”
						LOCKNUT
		47		49	73
		M10 x 25mm
				M8 x 15mm
		SCREW			1” x 2”
				HEX BOLT
					END PLUG
16
CONNECTOR	73
TUBE	1” x 2”			16	62	67
	END PLUG
				CONNECTOR	3/8”
						3/8”
				TUBE	WASHER
		6				LOCKNUT
FIGURE 7
				73
		BEAM
		LEFT BASE

1” x 2”

END PLUG

19