FIGURE 6
Step 26. Push 2” SQUARE END PLUGS (71) into each end of LEG EXTENSION FRAME (14).
Step 27. Attach LEG EXTENSION FRAME (14) to RIGHT SEAT CUSHION FRAME (13) with 3/8” x
Step 28. Place a PULLEY (76) into SLOT in LEG EXTENSION FRAME (14) and fasten with 3/8” x 2” HEX
BOLTS (51), 3/8” WASHERS (62), 13mm BUSHINGS (46) and 3/8” LOCKNUTS (67).
Step 29. Push 1” ROUND END PLUGS (74) into ends of FOAM RODS (17).
Step 30. NOTE: Liquid soap applied to FOAM RODS (17) will help FOAM ROLLS (83) slide on easier. Slide one FOAM ROLL onto one end of FOAM ROD, insert one FOAM ROD through RIGHT SEAT CUSHION FRAME (13) and the other through the LEG EXTENSION FRAME (14) and slide other FOAM ROLL onto other end.
53
3/8” x
HEX BOLT
71
2”
SQUARE
END PLUG
14
83LEG
FOAM EXTENSION
ROLL FRAME
74
62
3/8”
WASHER
83
FOAM ROLL
13
RIGHT
62
3/8”
WASHER
67
3/8”
LOCKNUT
17
FOAM
1”
ROUND
SEAT
ROD
74
1”
END PLUG
51
3/8” x 2”
HEX BOLT
76
PULLEY
SLOT
46 | 71 |
13mm | 2” |
BUSHING | SQUARE |
END PLUG
17
FOAM
ROD
62
3/8”
WASHER
CUSHION
FRAME
83
FOAM ROLL
67
3/8”
LOCKNUT
ROUND
END PLUG
83
FOAM
74ROLL 1”
ROUND
END PLUG
FIGURE 6
18