ASSEMBLY
Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools are required for assembly: the included allen wrenches | and your own | ||
phillips screwdriver | and a rubber mallet | . |
|
1.Note: Make sure that the two 5/16Ó x 1Ó Screws (76) are loose.
Tap a 1/2Ó Axle Cap (39) onto one end of the Incline Motor Axle (14). With the help of a second person, raise the Incline Frame (7). Insert the Incline Motor Axle through one side of the Incline Frame, through a Plastic Spacer (91), through the end of the motor screw, through another Plastic Spacer (91), and through the other side of the Incline Frame.
Tap a 1/2Ó Axle Cap (39) onto the other end of the Incline Motor Axle (14).
Tighten the two 5/16Ó x 1Ó Screws (76).
2.Raise the Upright (3). Slide the 3/8Ó Washer (94) onto the Knob (90). Secure the Upright by tightening the Knob into the Knob Guide (4).
3.Secure the Cup Holders (87) in the console plate by tapping the Cup Holders into the indicated holes.
1 |
|
| Motor |
| Screw |
| 39 |
| 91 |
76 |
|
39 |
|
14 | 7 |
| |
2 |
|
3 |
|
4 | 94 |
| 90 |
3 |
|
| 87 |
Console |
|
Plate |
|
4