![](/images/new-backgrounds/1290792/29079219x1.webp)
FASSEMBLY
#8 x 5/8" Screw
End of
Steering
Column
#8 Lock Nut
6
•Insert a #8 x 5/8" screw through the hole in the end of the steering column.
•Fit a #8 lock nut (rounded side out) on the end of the screw and tighten.
•While holding the lock nut with an adjustable wrench (or pliers), tighten the screw.
Tab UP | Wheel |
|
Steering
Column
Lens Guard Wide Tab
Lens
Lens
Wide
Notch
Lens Guard
8
•Fit the wide notch in the side of a headlight lens under the wide tab on a lens guard.
•Press firmly on the inside of the headlight lens to snap it into the lens guard.
•Repeat this procedure to assemble the other headlight lens to the remaining lens guard.
Grille | Slot | |
Tab | ||
|
Slot
Tab
Large Opening UP
7 SIDE VIEW
•Turn the vehicle upright.
•Position the steering wheel so that the large opening is UP as shown. The tab on the steering wheel stem should also be UP.
•Fit the steering wheel onto the steering column.
•Insert a #6 x 11/2" screw into the hole in of the steering wheel stem and tighten.
9 | FRONT VIEW |
• Fit a lens assembly tab into the headlight slots in the grille.
• Press firmly to snap the lens assembly into the grille.
• Repeat this procedure to snap the other lens assembly into the grille.
10 |