Healthrider HREL05982 HOW to Select Kilometers or Miles, Over be careful Not to pull on, Wires

Page 10

6Turn off the power

To turn off the power, simply wait for about six minutes. If the pedals are not moved and the console buttons are not pressed for six minutes, the power will turn off automatically.

HOW TO SELECT KILOMETERS OR MILES

The console can

display distance

and speed in either kilometers or miles. If a ÒKPHÓ appears in

the display, dis- tance and speed

will be shown in kilometers; if a ÒKPHÓ does not appear, distance and speed will be shown in miles.

	To change the
	unit of measure-
	ment, first remove
	the four indicated
	screws from the
	console. Lift the
	console a few
	inches and turn it
	over; be careful
	not to pull on the	Switch
	wires.	Switch
	wires.
	Next, locate the
	small switch on	Screws
	the back of the
	console. Slide the

switch up or down to change the unit of measurement. Reattach the console with the four screws; be careful not to pinch any of the wires.

Image 10

Contents Model No. HREL05982 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Right Side Before YOU BeginFront BackAssembly Page Incline Adjustment HOW to USE the Elliptical CrosstrainerHOW to Adjust the Resistance Using the Upper Body ArmsHOW the Pacer Programs Operate Turn on the powerDescription of the Console STEP-BY-STEP Console OperationSelect one of the three pacer programs or the manual mode Measure your heart rate if desiredWires HOW to Select Kilometers or MilesOver be careful Not to pull on Maintenance and Troubleshooting Pulse Sensor TROUBLE-SHOOTINGUnconditioned Conditioned Training Zone AGE BEATS/MIN Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Part LISTÑModel No. HREL05982 Key Qty DescriptionHNo Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT

HOW TO SELECT KILOMETERS OR MILES

over; be careful

not to pull on the

wires.