Assembly

To hire an authorized service technician to assemble the exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex

keys, assembly requires a phillips screwdriver and an adjustable

wrench .

As you assemble the exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 14. The second number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled.

M6 Spring	M8 Curved		M10 Spring	M10 Washer	M10 Curved
Washer (56)–1	Washer (60)–4	Washer (57)–2		(58)–2	Washer (59)–4
M8 Nylon	M6 x 10mm		M6 x 16mm		M8 x 40mm Button
Locknut (40)–4	Screw (55)–1		Screw (41)–4		Bolt (39)–4
M10 x 15mm Button
Screw (48)–2			M10 x 75mm Button Screw (42)–4