Healthrider HRCR4896.0 HOW to Operate the Exerciser, Adjusting the Seat, Adjusting the Resistance

Page 8
Handlebar
Handlebar
Knob
Resistance
Cylinder

HOW TO OPERATE THE EXERCISER

ADJUSTING THE SEAT

 

To adjust the posi-

 

tion of the seat,

Seat

loosen the seat

 

knob, move the

 

seat forward or

 

backward to the

 

desired position,

 

and then retighten

 

the knob. To deter-

 

mine if the seat is

 

properly adjusted,

Seat

sit on the seat and

Knob

pull the handlebar

 

as close as possible

 

to your stomach. Your legs should be almost straight, with your knees bent slightly.

ADJUSTING THE RESISTANCE

To change the

resistance, turn theCollar collar at the front of

the resistance cylinder. There are ten different resis- tance levels. A small arrow on the side of the resis- tance cylinder will show which resis-

tance level is selected. CAUTION: The resistance cylinder becomes very hot during use. Allow the resistance cylinder to cool before touching it.

When adjusting the resistance, touch only the resistance adjustment collar.

ADJUSTING THE HANDLEBAR

To adjust the height of the handlebar, loosen the handle- bar knob, move the handlebar upward or downward to the desired position, and then retighten the knob into an adjustment hole in the handlebar.

Make sure that the handlebar

knob is engaged in an adjustment hole.

EXERCISING ON THE EXERCISER

Sit on the seat, place your feet on the lower pedals, and hold the handlebar. Your hands can be positioned close together or far apart, or in an overhand or underhand grip. If necessary, adjust the position of the seat or the height of the handlebar.

To begin exercising, pull the handlebar toward your waist while pushing the pedals away with your legs. Return to the starting position. This completes one repetition. Repeat, moving with a smooth, continuous motion. For the best results, move through the full range of motion and maintain a steady pace.

CAUTION: To avoid injury, keep your back straight; do not arch your back. Do no operate the exerciser without the cylinder shields in place.

 

Handlebar

Seat

Upper

 

 

Pedals

 

Lower

 

Pedals

To focus on the muscles of the upper body, place your feet on the upper pedals as you exercise.

Note: The console will automatically turn on when you begin exercising on the exerciser. The operation of the console is described on the following page.

8

Image 8
Contents Call TOLL-FREE QUESTIONS?Model No. HRCR4896.0 Serial No Table of Contents Important PrecautionsRear Before YOU BeginFront Assembly Page Tab Dislodge the reed switch wire. Insert the battery Repeat this step for the other Seat HandlebarHOW to Operate the Exerciser Adjusting the SeatAdjusting the Resistance Adjusting the HandlebarHOW to Operate the Console Description of the ConsoleHOW to Replace the Battery Maintenance and TroubleshootingWheel Maintenance HOW to Measure Your Heart Rate Conditioning GuidelinesExercise Intensity Workout GuidelinesExercise Frequency Suggested StretchesPage Part LIST-Model No. HRCR4896.0 Key No. Qty DescriptionR1206A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty