Specialized CR2302 manual Mounting Speedzone Comp, Mounting Bracket

This computer also features:

•Second Wheel Option

•Easy calibration Mode

•Triple Display LCD

•Heavy-duty abrasion resistant pick-up wire

•Water resistant housing

•Two-year warranty

What is included in your SpeedZone Comp package:

1.SpeedZone Computer (1)

2.Mounting bracket (1)

3.Magnet with screw (1)

4.Cable tie wraps (4)

5.Mounting bracket sizing straps (3)

2

1

2

3 5

4

FIGURE 1:	FIGURE 2:
SENSOR	MAGNET
PLACEMENT	ATTACHMENT

MOUNTING

THE SPEEDZONE COMP

The SpeedZone Comp sensor can mount on the right or the left side of the fork blade. Use the cable tie-wraps provided to position the sensor. Do not tighten until the final placement of the sensor magnet is correct. (See figure 1)

FIGURE 3: MOUNTING BRACKET

Attach the magnet to a spoke across from the sensor with the magnet screw. The clearance between the magnet and the sensor should be approximately 1/32"-1/16" (1-2mm). Tighten the magnet and transmitter. Do not over- tighten the magnet screw. (See figure 2.)

Attach the mount to the handlebar using the bracket screw provided. Tighten so that the bracket cannot rotate on the handlebar. There are several

3