TROUBLESHOOTING
•Display is blank:
Change the battery or press the AC button on the bottom of the case
•Display shows partial digits: Press the AC button on the bottom of the case.
•Speed/distance not recording: Check sensor/magnet alignment. Make sure that the sensor is no more than 1/16" (2mm) from the magnet.
•Entire screen is dark:
Did you leave the bike parked in the hot direct sun when it was parked? If so, move the bike to the shade. The data will be OK.
•Computer moves on handlebar: Tighten mount or add sizing straps to improve fit on handlebar.
IMPORTANT!
•Pay attention to traffic and road conditions at all times. Your first obligation is to be attentive and to ride safely.
•Keep your computer in good shape and use it safely.
•Do not expose it to direct sunlight except when you are riding.
•Do not disassemble it.
•Make sure the magnet and
the transmitter are well aligned. Check them regularly.
•Keep the computer and all of its components tightly attached, and check them regularly. If any of the components come loose, it could become tangled in your spokes and cause an accident.
•See your authorized Specialized dealer if you have any trouble installing or maintaining your computer.
•Clean the unit with a mild detergent and a soft dry cloth. Never use any kind of solvent or alcohol.
•The SpeedZone Comp computer is intended for use on bicycles only and should not be used on any motorized vehicle.
WARRANTY INFORMATION Specialized cycling computers are guaranteed to be free from defects in materials and/or workmanship (excluding battery) for a period of two years from the date of purchase. Specialized will at its option, repair or replace your defective computer.
To receive warranty service send the unit, a copy of the sales receipt and a brief description of the problem to:
Specialized Bicycle Components Inc.
15130 Concord Circle
Morgan Hill, CA. 95037
Attn: Product Services/
Computer Warranty
18 | 19 |