Graco 13785-7-00 manual

Page 52

48

c. While still pinching the straps together, unbuckle the seat belt. Do not allow the straps to slip.

d. Connect the lap belt to the shoulder belt by placing the locking clip on the belts about ½ inch from the buckle tongue as shown Ê.

e. Re-buckle the belt and pull hard on the lap belt to be sure it does not move.

Ê

½

inch

f. Repeat this procedure if the lap belt is loose or lengthens when pulled.

13. If you are using the base, make sure that	Ë
there is nothing on top of or in the base that	Ë
may interfere with attachment of the safety seat.
Then push the safety seat down into the base
and make sure that you hear a “click” Ë.
Pull up on the safety seat to be sure it is latched
securely into the base.

If the safety seat does not securely latch into the base, the safety seat provides NO protection for your child. DO NOT use the safety seat/base if the safety seat does not securely latch into the base.

Image 52

Contents Helpful Hints Stroller Parts List To Adjust Back Infant Safety Seat/Carrier Table of Contents Page Keep this manual in the back pocket of the safety seat Properly securing your child in the safety seat Registering Your Safety Seat Model No Serial No Purchase DateImportant Safety Information About Your ChildAbout Using this Safety Seat in Your Vehicle When the Safety Seat is Not Occupied About the Life and Condition of this Safety Seat Never USE a SECOND-HAND Seat or BasePage Page Selecting a Suitable Location for the Safety Seat Consider These Basic RecommendationsBe Sure Your Vehicle Seat Meets All of These Requirements Page Be Sure Your Vehicle Seat Belt is Safe to Use Page Page Page Manual or contact your vehicle manufacturer Adjusting the Features and Components of the Safety Seat Your base will be either adjustable or non-adjustableFeatures and Components 3-Point Harness Front View 3-Point HarnessRear View 3-Point Harness Features and Components 5-Point Harness Front View 5-Point HarnessRear View 5-Point Harness Non-adjustable Base Adjustable Base Removing and Attaching the Safety Seat Base Adjusting the HandleAttaching the Canopy Page Inserting the Harness Straps in the Proper Slots Page For the 3-Point Harness Page For the 5-Point Harness Page Securing Your Child in the Safety Seat/Carrier Keeps the straps on your child’s shouldersCorrect Incorrect For the 3-Point Harness Insert the two buckle tongues into the harness buckle For Both 3 and 5-Point Harnesses Securing the Safety Seat/Base in Your Vehicle Preparation and Initial Safety Checks Positioning and Securing the Safety Seat/Base Seat belt should not be twisted or turned Now the vehicle seat belt must be tightened Tightening a lap-only belt To install the locking clip Page Properly Reclining the Safety Seat/Base Adjustable Base Non-adjustable Base Both BasesWithout Base Final Safety Checks If you find that your safety seat easily rotatesUsing the Safety Seat in an Airplane Using the Safety Seat with a Graco StrollerCleaning and Maintenance To wash the safety seat pad Models with 3-Point HarnessModels with 5-Point Harness Page Replacement Parts Instructions for Ordering Safety Seat PartsShip to Page Graco Children’s Products Inc Elverson, PA