Huffy M732201 manual Product Registration

Page 4

NOTICE TO ASSEMBLERS

Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products,

periodically inspect for loose small parts.

ALL basketball systems, including those used for DISPLAYS, MUST be assembled and installed according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift support system.

WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC

BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY

HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD

COULD RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED

IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE

NUMBER:

U.S. 1-800-558-5234; CANADA: 1-800-284-8339; http://www.huffysports.com

IMPORTANT!

Remove all contents from boxes.

Be sure to check inside pole sections; hardware and additional parts are packed inside.

PRODUCT REGISTRATION:

Please remember to complete your product registration form on- line at: www.huffysports.com/customer_support/product_registration.

ID# M732201 01/06

4

Image 4
Contents Write Model Number From Box Here Before YOU Start Moving Product Registration Get to know the basic parts of your basketball system Parts List See Hardware Identifier Hardware Identifier Bolts & Pins Item #7 Item #44 Section a Assemble the Base Align dimple of top pole into trough of middle pole as shown Dimple Hole Do not Over Orientation of Struts Section B Attach the Backboard TOP View Ratchet Assembly USE EYE Protection 01/06 ID# M732201 10. B 01/06 ID# M732201 Install Rim to Backboard If Using Sand 2 Gallons of ANTI-FREEZE is not Required