Huffy M732201 manual Align dimple of top pole into trough of middle pole as shown

Page 10

2. While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.

IMPORTANT!

Align dimple of top pole section (4) into trough of middle pole section (5) as shown.

pole em

ID

 

STICKER

5"

 

 

pole middle

 

1-1/2"

 

DIMPLE

 

HOLE

CAUTION!

THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 3-1/2" MINIMUM OVERLAP, LEAVING 1-1/2"

BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER.

5

4

WOOD SCRAP

(NOT SUPPLIED)

ID# M732201 01/06

10

Image 10
Contents Write Model Number From Box Here Before YOU Start Moving Product Registration Get to know the basic parts of your basketball system Parts List See Hardware Identifier Hardware Identifier Bolts & Pins Item #7 Item #44 Section a Assemble the Base Align dimple of top pole into trough of middle pole as shown Dimple Hole Do not Over Orientation of Struts Section B Attach the Backboard TOP View Ratchet Assembly USE EYE Protection 01/06 ID# M732201 10. B 01/06 ID# M732201 Install Rim to Backboard If Using Sand 2 Gallons of ANTI-FREEZE is not Required