10.Install the DS4000 Storage Manager 9.10 host software. Refer to the IBM TotalStorage DS4000 Storage Manager 9.10 Installation and Support Guide for the appropriate operating system for instructions on how to install the DS4000 Storage Manager 9.10 host software.
11.Turn on the DS4100. See “Turning the storage server on and off” on page 65.
12.Use the DS4000 Storage Manager 9.10 host software to verify the configuration.
Handling static-sensitive devices
Attention: Static electricity can damage electronic devices and your system. To avoid damage, keep
To reduce the possibility of electrostatic discharge (ESD), observe the following precautions:
vLimit your movement. Movement can cause static electricity to build up around you.
vHandle the device carefully, holding it by its edges or its frame.
vDo not touch solder joints, pins, or exposed printed circuitry.
vDo not leave the device where others can handle and possibly damage the device.
vWhile the device is still in its
vRemove the device from its package and install it directly into your system unit without setting it down. If it is necessary to set the device down, place it in its
Preparing for installation
Complete the following steps to prepare the DS4100 for installation into a rack cabinet.
1.Prepare the site to meet all area, environmental, power, and site requirements. For more information, see “Storage server operating environment” on page 13.
2.Move the DS4100 to the site.
Statement 4:
≥18 kg (39.7 lb)
≥32 kg (70.5 lb)
≥55 kg (121.2 lb)
18IBM TotalStorage DS4100 Storage Server: Installation, User’s, and Maintenance Guide