1.On the end of the LC-LC cable that connects into the SFP module or host bus adapter, press down and hold the lever to release the latches, as shown in Figure 43.

Lever

Latches

f10ug018

Figure 43. LC-LC fibre-channel cable lever and latches

2.Carefully pull on the connector to remove the cable from the SFP module, as shown in Figure 44.

f10ug017

Figure 44. Removing the LC-LC fibre-channel cable

3.Replace the protective caps on the cable ends.

4.Replace the protective cap on the SFP module.

Using LC-SC fibre-channel cable adapters

The LC-SC fibre-channel cable adapter is a fiber-optic cable that is used to connect an LC connector into one of the following devices that require SC connectors:

v1-Gbps fibre channel switch

vFibre channel host bus adapter

For more information about connecting to these devices, see the documentation that comes with the LC-SC fibre-channel cable adapter.

52IBM TotalStorage DS4100 Storage Server: Installation, User’s, and Maintenance Guide

Page 84
Image 84
IBM Partner Pavilion DS4100 manual Using LC-SC fibre-channel cable adapters, LC-LC fibre-channel cable lever and latches