IBM Partner Pavilion DS4100 5. Connect a fibre channel cable.

DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Attention: When you handle static-sensitive devices, take precautions to avoid
damage from static electricity. For details about handling static-sensitive devices,
see “Handling static-sensitive devices” on page 18.
1. Remove the SFP module from its static-protective package.
2. Remove the protective cap from the SFP module, as shown in Figure 34. Save
the protective cap for future use.
3. Remove the protective cap from the host port. Save the protective cap for future
use.
4. Insert the SFP module into the host port until it clicks into place. See Figure 35.
5. Connect a fibre channel cable.
Protective cap
SFP module
Plastic tab
F10ug014
Figure 34. Small Form-Factor Pluggable (SFP) module
SFP module
RAID controller
Fiber-optic
cable
f10ug041
Figure 35. Installing an SFP module into the host port
Chapter 3. Cabling the storage server 47