ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
parts@staminaproducts.com
A. |
COLLAR |
B. |
STEP 1
Lift up the LEFT and RIGHT PEDAL ARMS(2, 3). Insert the PULLEY BRACKET(7) into the Collar on the MAIN FRAME(1). Wrap the CABLE(9) around the PULLEY(8) and press the two PEDAL ARMS(2, 3) down. Refer to illustration A.
NOTE: Always make sure that the CABLE(9) is properly seated in the groove on the PULLEY(8) before using the INSTRIDE
PRO stepper.
STEP 2
Refer to illustration B. Install one "AAA" battery into the back of the METER(13), one battery included. Plug the SENSOR WIRE(11) into the METER(13), then slide the METER(13) onto the MOUNTING CAP(12). NOTE: 1. Please be careful not to damage the SENSOR WIRE(11) when attaching the METER(13).
2. See page 7 for detailed battery installation instructions.
5