JVC HX-Z3 manual Turning On or Off the Key-touch Tone, Creating Your Own Sound Mode-User Mode

Page 14
Your individual mode stored in memory. See “Creating Your Own Sound Mode—User Mode” below.
The sound mode is canceled.
Boosts low and high frequency. Good for acoustic music.
Good for vocal music. Good for classical music.

Surround modes*

DANCE: Increases resonance and bass.

HALL: Adds depth and brilliance to the sound.

STADIUM: Adds clarity and spreads the sound, like in an outdoor stadium.

SEA (Sound Effect Amplifier) modes

ROCK:

POP:

CLASSIC:

User Modes

USER 1/2/3:

OFF:

*Surround elements are added to the SEA elements to create a being-there feeling in your room.

3 Adjust the SEA pattern.

1)Turn 4 / ¢ to select the frequency range (LOW1, LOW2, MID, HIGH1, or HIGH2).

2) Press 1 or ¡ to adjust the level (–3 to +3) of the selected frequency range.

3)Repeat steps 1) and 2) to adjust the level of the other frequency ranges.

4 Press SET/DISPLAY again.

PR

E

SET

SET /

DISPLAY

Creating Your Own Sound Mode—User Mode

You can change SEA pattern to suit your preference. The SEA pattern can be adjusted using 5 frequency ranges—LOW1, LOW2, MID, HIGH1, and HIGH2. These changed settings can be stored in the USER 1, USER 2, and USER 3 modes.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

1 Select one of the preset sound modes.

5 Turn 4 / ¢ to select one of the user modes (USER 1, USER 2, or USER 3) in which you want to store your SEA pattern.

6 Press SET/DISPLAY again.

PR

E

SET

SET /

DISPLAY

•If you want to add the surround elements in your SEA pattern, select one of the surround modes (DANCE, HALL, or STADIUM) before starting the procedure below. (See “Selecting the Sound Modes” on page 10.)

2

Press SET/DISPLAY while the

SET /

DISPLAY

selected sound mode is still shown on the display.

The SEA pattern you have created are stored into the user mode selected in step 5.

To use your own sound mode

Select USER 1, USER 2, or USER 3 mode when using the sound modes. See “Selecting the Sound Modes” on page 10.

When you unplug the AC power cord or if a power failure occurs

The setting will be erased in a few days. If this happens, set the user modes again.

Turning On or Off the Key-touch Tone

If you do not want the key-touch tone to beep each time you press a button, you can deactivate it.

 

On the remote control ONLY:

Current level appears.

Press BEEP ON/OFF.

 

• Each time you press the button, the key-touch

 

tone turns on and off alternately.

BEEP

ON/OFF

– 11 –

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Instructions Mises en garde, précautions et indications diverses For Canada/pour le Canada About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Display Window Remote Control Remote ControlGetting Started Supplied Accessories Connecting AntennasPutting the Batteries into the Remote Control FM antenna To connect an outdoor FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna Close the speaker terminalsTo connect an analog component Connecting Other EquipmentCanceling the Demonstration To start the demonstration manuallyCommon Operations Turning On or Off the PowerTo adjust the clock again To check the clock time while playing a sourceSelecting the Sources Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundTurning On or Off the Key-touch Tone Creating Your Own Sound Mode-User ModeTo use your own sound mode Presetting Stations Tuning in to a StationTuning in to a Preset Station To change the FM reception modeDisc Play Introduction MP3 IntroductionHow are MP3 files recorded and played back? Playing Back the Entire Discs-Continuous Play Playing Back DiscsLoading Discs For audio CDsBasic Disc Operations Programming the Playing Order of the Tracks -Program Play To modify the program To check the program contentsPlaying at Random-Random Play Repeat ALL During Continuous Play For audio CDsFor MP3 discs During Program PlayLocating the Beginning of a Song-Music Scan Playing Back TapesPlaying Back a Tape Recording on a Tape To record on both sides-Reverse ModeRecording To keep the best recording and playback sound qualityPress CD REC Start Synchronized RecordingDirect Recording Load a disc Select a discAuto Edit Recording only for audio CDs How Daily Timer actually works Using the TimersUsing Daily Timer Volume level When selecting Tuner FM or TuneramWhen selecting 1 CD Daily Timer settingUsing Recording Timer How Recording Timer actually worksTo turn on or off Recording Timer after its setting is done Using Sleep TimerTimer Priority How Sleep Timer actually worksGeneral Notes MaintenanceCleaning the unit Handling discsTroubleshooting SymptomHarmonic distortion SpecificationsAt 63 Hz with no more than 10% total Authorized Service Centers Limited Warranty 0402MWMMDWJEM Demonstration Démonstration

HX-Z3 specifications

The JVC HX-Z3 is a compact, high-performance home audio system that combines advanced audio technologies with a sleek design, making it a great addition to any entertainment setup. This system is designed for audiophiles looking for an impressive sound experience without taking up much space.

One of the standout features of the JVC HX-Z3 is its versatile playback capabilities. It supports multiple formats, allowing users to enjoy music from CDs, USB drives, and via Bluetooth connectivity. This means users can easily stream music from their smartphones or tablets, providing flexibility in how they listen to their favorite tracks. The system also supports various audio file types, enhancing its adaptability to different audio sources.

The HX-Z3 is equipped with a high-quality speaker system that delivers clear and dynamic sound. With a total output power of 60 watts, the system offers powerful audio that fills the room. The speakers are designed to produce a balanced sound with a good mix of bass, midrange, and treble. This allows for an immersive listening experience, whether you're enjoying music, watching movies, or playing video games.

Incorporating JVC's proprietary technologies, the HX-Z3 features a digital sound processor (DSP) that enhances audio performance. The DSP provides various sound modes, allowing users to tailor the audio output to suit different listening environments and personal preferences. The system also includes a built-in equalizer, providing further customization of the audio experience.

Additionally, the JVC HX-Z3 sports a user-friendly interface with an intuitive remote control, making it easy to navigate through settings and playback options. The sleek design complements modern décor, and its compact size means it can fit seamlessly into any space, whether on a shelf or as part of a home theater setup.

The JVC HX-Z3's construction includes durable materials that ensure longevity while maintaining an attractive aesthetic. With its combination of impressive audio capabilities, modern connectivity options, and thoughtful design, the JVC HX-Z3 is an excellent choice for anyone looking to enhance their home audio experience with a compact solution that doesn’t compromise on sound quality.
Top Page Image Contents