JVC HX-Z3 Synchronized Recording, Direct Recording, Press CD REC Start, Load a disc Select a disc

Continued

Synchronized Recording

By using Synchronized Recording methods, you can start and stop both disc play and tape recording at the same time. Synchronized Recording consists of the following:

7Direct Recording

7Auto Edit Recording (only for audio CDs)

7Direct Recording

Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you have made for Program Play.

On the unit ONLY:

4 Press CD REC START.	CD REC
	START

“CD REC” appears on the display and the REC (recording) lamp flashes when recording starts.

The cassette deck starts recording while the CD player starts playing.

When the recording is done, “CD REC FINISHED” appears scrolling on the display, and the REC (recording) lamp turns off. Both the cassette deck and the CD player stop automatically.

To stop recording, press 7 to create a 4-second blank portion on the recording tape. (Remember a 4-second blank is important when using Music Scan—see page 20.)

1

2

3

Press 0 EJECT and insert a recordable cassette with the exposed part of the tape down.

Load a disc.

Select a disc.

For audio CDs:

Press the corresponding disc number	CD3
(CD1, CD2, or CD3) button where a	CD2
disc is loaded in step 2, then press 7.
	CD1
For MP3 discs:

You can select a track to start recording with. 1) Press the corresponding disc number CD3 (CD1, CD2, or CD3) button where a

CD2

disc is loaded in step 2.

CD1

2)Turn 4/ ¢to select the group, then press CD 3¥8.

PRESET

CD

To record on both sides—Reverse Mode

On the unit ONLY:

Press REVERSE MODE so that the Reverse Mode MODE
	REVERSE
indicator on the display lights up like—	.

•When using the Reverse Mode for Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be re-recorded at the beginning of the reverse side (2).

If you start recording on the reverse side (2) first, recording will stop when only one side (reverse) of the tape is recorded.

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator lights up on the display like— .

3)Turn 4 / ¢ to select the track.

– 22 –