JVC HX-Z3 manual Using the Timers, Using Daily Timer, How Daily Timer actually works

Page 27

Using the Timers

Continued

 

 

There are three timers available—DAILY (Daily Timer), REC (Recording Timer), and SLEEP (Sleep Timer).

You can set the timers whether the unit is on or off; however, if Ecology Mode is activated, you cannot set the timers while the unit is off.

Before using the timers, set the clock built in the unit. (See page 9.)

Using Daily Timer

With Daily Timer, you can be wake up with your favorite music or radio program.

How Daily Timer actually works

The unit automatically turns on, sets the volume level to the preset level, and starts playing the specified source when the on-time comes. (“DAILY” and the DAILY indicator flash just before the on-time, and the DAILY indicator continues flashing while the timer is operating.) Then, when the off- time comes (“DAILY OFF” flashes just before the off-time), the unit automatically turns off (on standby).

The Daily Timer works everyday automatically. If you do not want to use the Daily Timer, turn it off. (See “To turn on or off Daily Timer after its setting is done” on page 25.) The timer setting remains in memory until you change it.

On the unit ONLY:

1 Press CLOCK/TIMER

/ TIMER

 

CLOCK

repeatedly until “DAILY”

 

appears on the display.

 

The (Timer) indicator lights up and the DAILY (Daily Timer) indicator also starts flashing on the display.

D A I L Y

•Each time you press the button, the timer setting modes change as follows:

 

 

 

 

DAILY

 

 

 

 

TIMER

 

 

 

REC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Daily Timer setting)

 

 

 

 

Canceled

 

 

 

 

Clock

 

 

 

TIMER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

setting

(Recording Timer setting)

 

 

 

 

 

(The hour digits start flashing.)

 

2 Press CLOCK/TIMER again.

/ TIMER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOCK

“TIMER” appears for 2 seconds, then the unit enters on-time setting mode.

D A I L Y

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•To correct a misentry while setting the timer, press

CANCEL/DEMO.

Before you start...

• When using a disc as the source to play—

– Make sure there is a disc on the selected disc tray.

• When using a tape as the source to play—

– Make sure that a tape is in the cassette deck.

– Make sure that the tape direction is correct.

• When using the external component as the source to

3 Set the on-time you want the unit to turn on at.

1)Turn 4 / ¢ to set the hour, then press SET/DISPLAY.

“SET” appears for 1 second.

2)Turn 4 / ¢ to set the minute, then press SET/DISPLAY. “SET” appears for 1 second, then the unit enters off-time setting mode.

PR

E

SET

SET /

DISPLAY

play—

– Set the timer equipped on the external component at

the same time.

D A I L Y

– 24 –

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Instructions Mises en garde, précautions et indications diverses For Canada/pour le Canada Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront Panel Display Window Remote Control Remote ControlTo connect an outdoor FM antenna Supplied Accessories Connecting AntennasPutting the Batteries into the Remote Control FM antenna Getting StartedClose the speaker terminals Connecting SpeakersAM antenna To connect an outdoor AM antennaTo start the demonstration manually Connecting Other EquipmentCanceling the Demonstration To connect an analog componentTo check the clock time while playing a source Turning On or Off the PowerTo adjust the clock again Common OperationsReinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Selecting the SourcesCreating Your Own Sound Mode-User Mode To use your own sound modeTurning On or Off the Key-touch Tone To change the FM reception mode Tuning in to a StationTuning in to a Preset Station Presetting StationsMP3 Introduction Disc Play IntroductionHow are MP3 files recorded and played back? For audio CDs Playing Back DiscsLoading Discs Playing Back the Entire Discs-Continuous PlayBasic Disc Operations Programming the Playing Order of the Tracks -Program Play To check the program contents Playing at Random-Random PlayTo modify the program During Program Play For audio CDsFor MP3 discs Repeat ALL During Continuous PlayPlaying Back Tapes Playing Back a TapeLocating the Beginning of a Song-Music Scan To keep the best recording and playback sound quality To record on both sides-Reverse ModeRecording Recording on a TapeLoad a disc Select a disc Synchronized RecordingDirect Recording Press CD REC StartAuto Edit Recording only for audio CDs Using the Timers Using Daily TimerHow Daily Timer actually works Daily Timer setting When selecting Tuner FM or TuneramWhen selecting 1 CD Volume levelHow Recording Timer actually works Using Recording TimerHow Sleep Timer actually works Using Sleep TimerTimer Priority To turn on or off Recording Timer after its setting is doneHandling discs MaintenanceCleaning the unit General NotesSymptom TroubleshootingSpecifications At 63 Hz with no more than 10% totalHarmonic distortion Authorized Service Centers Limited Warranty 0402MWMMDWJEM Démonstration Demonstration

HX-Z3 specifications

The JVC HX-Z3 is a compact, high-performance home audio system that combines advanced audio technologies with a sleek design, making it a great addition to any entertainment setup. This system is designed for audiophiles looking for an impressive sound experience without taking up much space.

One of the standout features of the JVC HX-Z3 is its versatile playback capabilities. It supports multiple formats, allowing users to enjoy music from CDs, USB drives, and via Bluetooth connectivity. This means users can easily stream music from their smartphones or tablets, providing flexibility in how they listen to their favorite tracks. The system also supports various audio file types, enhancing its adaptability to different audio sources.

The HX-Z3 is equipped with a high-quality speaker system that delivers clear and dynamic sound. With a total output power of 60 watts, the system offers powerful audio that fills the room. The speakers are designed to produce a balanced sound with a good mix of bass, midrange, and treble. This allows for an immersive listening experience, whether you're enjoying music, watching movies, or playing video games.

Incorporating JVC's proprietary technologies, the HX-Z3 features a digital sound processor (DSP) that enhances audio performance. The DSP provides various sound modes, allowing users to tailor the audio output to suit different listening environments and personal preferences. The system also includes a built-in equalizer, providing further customization of the audio experience.

Additionally, the JVC HX-Z3 sports a user-friendly interface with an intuitive remote control, making it easy to navigate through settings and playback options. The sleek design complements modern décor, and its compact size means it can fit seamlessly into any space, whether on a shelf or as part of a home theater setup.

The JVC HX-Z3's construction includes durable materials that ensure longevity while maintaining an attractive aesthetic. With its combination of impressive audio capabilities, modern connectivity options, and thoughtful design, the JVC HX-Z3 is an excellent choice for anyone looking to enhance their home audio experience with a compact solution that doesn’t compromise on sound quality.
Top Page Image Contents