JVC HX-Z3 manual Auto Edit Recording only for audio CDs

Page 26

7Auto Edit Recording (only for audio CDs)

Using Auto Edit Recording, you can record the tracks on a CD onto both sides of the tape. However, if the tracks are recorded segmentally starting from track 1, the track recorded on the end portion of the front side of the tape may be cut off; to prevent this, the unit automatically selects an appropriate-length track so it fits the remaining tape length properly.

On the unit ONLY:

 

1

Load a disc.

 

2

Press the corresponding disc

CD3

 

 

 

number (CD1, CD2, or CD3)

CD2

 

button where a disc is loaded in

CD1

 

step 1, then press 7.

 

 

• If there is no disc on the selected disc tray, “NO DISC 1,”

 

“NO DISC 2,” or “NO DISC 3” appears, and the unit

 

continues to search for a disc from another disc tray.

3

Press EDIT.

EDIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 Insert a recordable cassette of appropriate length into the cassette deck.

6

Press REVERSE MODE so that

REVERSE

MODE

the Reverse Mode indicator lights up like— .

Without turning on the Reverse Mode, recording will stop when the front side of the tape is recorded.

7 Press CD REC START.

CD REC

 

START

“CD REC” appears, then “TAPE SIDE-A STAND-BY” scrolls on the display, and the REC (recording) lamp flashes.

The cassette deck starts recording. About 10 seconds later, the CD player starts playing.

When the recording is done, “CD REC FINISHED” scrolls on the display and the REC (recording) lamp turns off. Both the cassette deck and CD player stop automatically.

If a tape has not been rewound, the cassette deck will rewind the tape before it starts recording.

A 10-second blank portion is automatically created at the beginning of each side of the tape.

To stop during Auto Edit Recording

Press REC START/STOP or 7 to create a 4-second blank portion on the recording tape. (Remember, a 4-second blank is important when using Music Scan—see page 20.)

To cancel Auto Edit Recording

Press CANCEL/DEMO before or after recording.

The optimum tape length for the disc appears.

To change the tape length manually

If the tape length selected is not satisfactory, you can change the tape length by turning 4 / ¢ on the unit. You can select the tape length among the following —40, 46, 50, 54, 60, 64, 70, 74, 80, 84, and 90.

4 Press SET/DISPLAY.

Each time you press the button, the tracks to be recorded on the front side (“SIDE-A”) and on the reverse side (“SIDE-B”) appear on the display alternately.

Tracks to be recorded on the reverse side (SIDE-B) appear.

SET /

DISPLAY

– 23 –

Image 26
Contents Instructions Mises en garde, précautions et indications diverses For Canada/pour le Canada About This Manual PrecautionsIntroduction Contents Front Panel Location of the Buttons and ControlsFront Panel Display Window Remote Control Remote ControlGetting Started Supplied Accessories Connecting AntennasPutting the Batteries into the Remote Control FM antenna To connect an outdoor FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna Close the speaker terminalsTo connect an analog component Connecting Other EquipmentCanceling the Demonstration To start the demonstration manuallyCommon Operations Turning On or Off the PowerTo adjust the clock again To check the clock time while playing a sourceSelecting the Sources Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundTurning On or Off the Key-touch Tone Creating Your Own Sound Mode-User ModeTo use your own sound mode Presetting Stations Tuning in to a StationTuning in to a Preset Station To change the FM reception modeDisc Play Introduction MP3 IntroductionHow are MP3 files recorded and played back? Playing Back the Entire Discs-Continuous Play Playing Back DiscsLoading Discs For audio CDsBasic Disc Operations Programming the Playing Order of the Tracks -Program Play To modify the program To check the program contentsPlaying at Random-Random Play Repeat ALL During Continuous Play For audio CDsFor MP3 discs During Program PlayLocating the Beginning of a Song-Music Scan Playing Back TapesPlaying Back a Tape Recording on a Tape To record on both sides-Reverse ModeRecording To keep the best recording and playback sound qualityPress CD REC Start Synchronized RecordingDirect Recording Load a disc Select a discAuto Edit Recording only for audio CDs How Daily Timer actually works Using the TimersUsing Daily Timer Volume level When selecting Tuner FM or TuneramWhen selecting 1 CD Daily Timer settingUsing Recording Timer How Recording Timer actually worksTo turn on or off Recording Timer after its setting is done Using Sleep TimerTimer Priority How Sleep Timer actually worksGeneral Notes MaintenanceCleaning the unit Handling discsTroubleshooting SymptomHarmonic distortion SpecificationsAt 63 Hz with no more than 10% total Authorized Service Centers Limited Warranty 0402MWMMDWJEM Demonstration Démonstration

HX-Z3 specifications

The JVC HX-Z3 is a compact, high-performance home audio system that combines advanced audio technologies with a sleek design, making it a great addition to any entertainment setup. This system is designed for audiophiles looking for an impressive sound experience without taking up much space.

One of the standout features of the JVC HX-Z3 is its versatile playback capabilities. It supports multiple formats, allowing users to enjoy music from CDs, USB drives, and via Bluetooth connectivity. This means users can easily stream music from their smartphones or tablets, providing flexibility in how they listen to their favorite tracks. The system also supports various audio file types, enhancing its adaptability to different audio sources.

The HX-Z3 is equipped with a high-quality speaker system that delivers clear and dynamic sound. With a total output power of 60 watts, the system offers powerful audio that fills the room. The speakers are designed to produce a balanced sound with a good mix of bass, midrange, and treble. This allows for an immersive listening experience, whether you're enjoying music, watching movies, or playing video games.

Incorporating JVC's proprietary technologies, the HX-Z3 features a digital sound processor (DSP) that enhances audio performance. The DSP provides various sound modes, allowing users to tailor the audio output to suit different listening environments and personal preferences. The system also includes a built-in equalizer, providing further customization of the audio experience.

Additionally, the JVC HX-Z3 sports a user-friendly interface with an intuitive remote control, making it easy to navigate through settings and playback options. The sleek design complements modern décor, and its compact size means it can fit seamlessly into any space, whether on a shelf or as part of a home theater setup.

The JVC HX-Z3's construction includes durable materials that ensure longevity while maintaining an attractive aesthetic. With its combination of impressive audio capabilities, modern connectivity options, and thoughtful design, the JVC HX-Z3 is an excellent choice for anyone looking to enhance their home audio experience with a compact solution that doesn’t compromise on sound quality.