English
A-B Repeat
•
1While playing, display the
2 Select | . |
3 Display the
8.5 Mbps | DISC 1 TITLE | 2 | CHAP 3 | TOTAL 1:01:58 | |
TIME | OFF | CHAP. | 1/3 | 1/3 | 1/1 |
OFF
4 Select
8.5 Mbps | DISC 1 TITLE 2 | CHAP 3 TOTAL | 1:01:58 | ||
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
|
|
|
|
|
5 Select the start point (A).
8.5 Mbps | DISC 1 TITLE 2 C | ||
TIME | A- | CHAP. | 1/3 |
6 Select the end point (B).
•Before pressing ENTER, you can search for the end point using ¡.
Time Search
You can move to a particular point by specifying the elapsed playing time from the beginning.
1While playing (without PBC for SVCD/VCD), display the
•Except for DVD
2Select .
3Display the
8.5 Mbps | DISC 1 TITLE 2 | CHAP 3 TOTAL | 1:01:58 | ||
TIME | OFF | CHAP. | 1/3 | 1/ 3 | 1/1 |
| TIME | _ : _ _ : _ _ |
|
|
|
4Enter the time.
You can specify the time in hours/minutes/seconds.
Examples:
To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.
To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.
•It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).
•To correct a misentry, press cursor 2 to erase the last entry.
5 Finish the setting.
The System starts playing from the specified time.
To remove the
29