Operation and Adjustment

THE MAINTENANCE-FREE WALKING BELT

Your treadmill features a maintenance-free walking belt coated with PERFORMANT LUBE TM, a high- performance lubricant. During the first few hours of use, it Is normal for a small amount of white powder to appear on the foot roils and the walking platform. The white powder is high-performance lubricant from the walking bell IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. They will deteriorate the walking belt and cause excessive wear.

HOW TO PLUG IN THE POWER CORD

A temporary adapter that looks like the adapter illus- trated in Drawing 2 may be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet is not available.

Grounded Box

Grounding Pin

Grounding

Plug

Lug

Metal Screw

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path ?f least resistance for electric current to reduce the risk of elec-

tric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. Plug the power cord into an appropriate outlet that is properly installed and grounded in accor- dance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- trated in Drawing 1.

1Grounded

Grounding Plug

Grounding Pin

Grounded Outlet

The temporary adapter should be used only until a prop- eriy grounded outlet (Drawing 1) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used it must be held in place by a metal screw. Some 2-pole recep- tacle outlet box covers are not grounded. Contact a qualified electriclan to determine if the outlet box cover is grounded before using an adapter.

HOW TO INSTALL BA'I-rERIES IN THE CONSOLE

The console requires two "AA" batteries (not includ- ed) for the motivational fitness monitor to operate; alkaline batteries are recommended.

To install batteries, first slide the battery cover open (see the drawing below). Remove the battery clip from the console. Find the markings inside the battery clip showing which direction the batteries should be turned. Press the batteries into the battery clip. Replace the battery clip in the console and close the battery cover.

Battery Cover

ery Clip