JVC MX-J111V manual Troubleshooting, Symptom, Possible Cause, Action

Page 40

English

Troubleshooting

•If you are having a problem with your System, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Unable to record.

Poor radio reception

The CD skips.

Unable to operate the Remote Control.

The CD tray cannot be opened.

The CD does not play.

Operations are disabled.

The cassette door cannot be opened.

The image on the TV screen loses its colour.

The disc sound loses stereo effect.

The pictures of the video CD or CD-G is distorted.

Possible Cause

Connections are incorrect, or loose.

Cassette record protect tabs are removed.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the Unit.

•The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The main AC power cord is not plugged in.

The CD is upside down.

The built-in microprocessor has malfunc- tioned due to external electrical interfer- ence.

During tape playing, the power cord was unplugged.

Video Out selection is unmatching.

The MPX sound, Vocal Masking or Vocal Replace function is in use.

When you pause or advance the pictures manually, the pictures are distorted. This is not a malfunction.

Action

Check all connections and make corrections. (See pages 4 – 5.)

Cover holes on back edge of cassette with tape.

•Reconnect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

•Remove the obstruction.

•Replace the batteries. Plug in the AC power plug.

Put the CD in with the label side up. Unplug the Unit then plug it back in.

Plug in the power cord, press the button, and then press the 0EJECT button.

Select the correct video out. (See “Setting Video Output” on page 6.)

Press the MPX/V.REPLACE/V.MASKING button until “NORMAL” appears on the display.

35

Image 40

Contents MX-J111V Precaución -- Interruptor Precaução -- InterruptorPrecaución PrecauçãoPrecaução Ventilação adequada Precaución el aparato debe estar bien ventiladoCA-MXJ111V Class Laser Product Features Installation of the UnitPower cord How This Manual Is OrganizedTable of Contents Accessories Set the Voltage Selector SwitchHow to Put Batteries in the Remote Control Using the Remote ControlConnecting the FM Antenna Connecting the AM AntennaUsing the Supplied Wire Antenna Using an FM 75 Ohm Antenna Wire not suppliedConnecting the Speakers Connecting Auxiliary EquipmentWhen you connect the Unit to TV Connect TV to Video OUTConnecting the Video Out Setting Video OutputUsing the Video Cord On the TV screenCompu Play Turning the Power On and Off Common OperationsDisplay Turning the System OnReinforcing the Bass Sound Adjusting the VolumeSound Modes Set the Volume control to Press the AUX button Listening to Auxiliary EquipmentSetting the AM Tuner Interval Spacing Using the TunerOne Touch Radio Tuning in a Station Presetting StationsChanging the FM Reception Mode Switching between Frequency BandsDisc display Using the CD PlayerThis Unit can play the following CDs Inserting Discs Quickest Way to Start a CD Is with the One Touch OperationPlace a CD, with its label side up, onto the tray CorrectincorrectBasics of Using the CD Player Normal Play Locating a Track with the Remote Control DirectlyPlaying a Disc Selecting a Disc, Track or Passage within a TrackProgramming the Playing Order of the Tracks Select a disc withCD1, CD2 or CD3 button Disc number Step numberRandom Play Repeating a Selection or the DiscsPress the Random button while the CD player is stopped Press the Repeat button on the unitTray Lock Function Locking the Electronic LockUnlocking the Electronic Lock UnitPlaying Video CDs and CD-Gs Special Plays for Video CDsFrame-by-Frame Playback Viewing Operation StatusTo stop and cancel the video intro, press the 7button To stop and cancel the highlight, press the 7buttonViewing the Video Intro of a Video CD Viewing the Highlights of a Video CDPlaying Video CDs with Using Menu Screens Playing Video CDs with PBC FunctionPrepare Video CDs Start playback of the Video CDPrepare a Video CD Playing Video CDs without Using Menu ScreenConcept of PBC Flow Using the Cassette Deck Tape £ Deck A/B REV. ModeTape Direction Indicator on the Display Regular PlayReverse Mode Music ScanFast Left and Fast Right UP Finding the Beginning of the Current SelectionThings to Know Before You Start Recording DubbingREC Pause REC START/STOPStandard Recording Recording Any Sound Source to TapeCheck the recording direction for the tape Press the 2 or 3 buttonCD Direct Recording How to Use the Dubbing ButtonTape to Tape Recording Dubbing Using the Timer Setting the ClockPress the Select + or button to set the time Press the SET buttonSetting the Timer Setting the Sleep Timer = 10 =20 = 30 =60 = 90 = 120 = CanceledTo Change the Sleep Timer Setting To Cancel the Sleep Timer SettingUsing the Microphone Playing the Microphone Sound through the SpeakersEcho MIC LevelMicrophone Mixing Pressing down the Shift button on the Remote ControlApplying Echo to Your Vocal Adjusting Key Control Singing Along with Multiplex Karaoke Discs or TapesMultiplex Sound Vocal ReplaceCare and Maintenance Compact Discs Cassette TapesMoisture Condensation Cassette DeckTroubleshooting SymptomPossible Cause ActionSpecifications JVC 0899KSMMDWHIT