NOTE
-When you walk or run for around 10 seconds, the unit sensor will pick this up and a display showing current pace for the walk or run will appear. However, if there is no activity for around 10 seconds, the current pace for walk or run on the display will be stopped and it will return to the time mode.
-When in the pedometer mode and there is no activity for around 1 minute, it will automatically return to time mode
-If you wish to have the most accurate fitness index calculated by the unit, the user must use the calibration feature for both walking and running. They will also need to input their personal user settings
-Your watch is designed to count your steps when it is worn on your left hand. It will not count your steps correctly if you wear it on your right wrist or on your belt, or if you have it in your bag.
In order to maximize the accuracy of the step counting feature of the watch, please wear the watch properly as shown in the diagram (strap of the watch must fasten tightly around the wrist and it must not be loose; display must also be perpendicular to the forearm and wrist; the watch must only be worn on the left wrist and not the right to maximize the accuracy of step counting) The design and accuracy of the watch for step counting is based on the positioning of the watch. The 3D sensor of the watch will automatically sense the walk or run of the user and count the steps. By wearing the watch correctly, the steps counted during the daily walk and, or run will be more accurate.
Please take off the strap from your wrist before you take out the watch unit.
AVG | - Average |
KM/h | - Kilometers per hour |
Mi/h | - Miles per hour |
Kcal | - Unit of Calories Burnt |
AM | - Time from 0:00.00 to 11:59.59 |
PM | - Time from 12:00.00 to 23:59.59 |
/ MIN | - Heart beat per minute |
STEP | - Step you have walk |
KM | - Kilometer |
Mi | - Miles |
gFAT | - Alarm |
- Unit of Fat Burnt |
NORMAL WALKING MEASUREMENT
Before you track the number of steps you take as you go about your normal daily life, you need to go to the Pedometer User Setting mode to turn " ON " the normal walking measurement. ( page 12 )
5