6. Press Mode/Set key to enter next setting
- WALKING STRIDE LENGTH
Press Start/Stop/+ key to increment the setting item.
Press save/reset/- key to decrement the setting item.
Default : 71cm / 10" , Range : 20 to 180cm / 8" to 5'11"
7.Press Mode/Set key to enter next setting
- RUNNING STRIDE LENGTH
Press Start/Stop/+ key to increment the setting item.
Press save/reset/- key to decrement the setting item.
Default : 120cm / 14" , Range : 20 to 180cm / 8" to 5'11"
8. Press Mode/Set key to enter next setting
- SENSITIVITY ADJUSTMENT
Press Start/Stop/+ key to increment the setting item.
Press save/reset/- key to decrement the setting item.
Default : Level 4, Range : Level 1 - 4
9. Press Mode/Set key to enter next setting - STEP COUNTING Press Start/Stop/+ key or save/reset/- key to enable/disable the step counting function. Default : OFF
The watch will exit the setting screen and go back to Time/Date mode automatically if you do not perform any operation after around 60 seconds
Press and hold the mode/set key to quit the setting mode and all revised setting will be kept after exit.
IN PEDOMETER MEMORY RECALL MODE
1.Press and hold the memory/EL button for 3 seconds to enter Pedometer Memory Recall Mode.
2.Press start/stop/+ key or save/reset/- key to select the memory record
MEMORY RECORD #1 | NO MEMORY RECORD | ERROR RECORD |
NOTE : When the display is dim, this indicates the watch is operating on low battery. It may have a data error reading and the watch will show a "ERR" display, then you will need to change the batteries
13