PYLE Audio PHRM26 manual Installing the Battery, Watch

Page 16

Total Step - Total Distance - Total Calories - Heart Rate - Exercise Report

4.Press Calendar button will show all the exercise record.Double click on the date with ￿ walking icon of your desired report.

5.Press the Print button and a dialogue box will come out.

6.Select the date period of the record you would like to print and save it a "PDF" report will saved on your PC.￿￿

INSTALLING THE BATTERY

The Watch uses 2 pieces CR 2032 batteries (one each for watch and heart rate belt ). Use only the recommended batteries.

NOTE : Changing the battery will erase the data in the watch previously input into the device and you can then/will need to re-set the watch all over again.

Watch

1.The battery compartment s located at the back of the watch.

2.To install/replace the battery, unscrew the battery compartment with the screw driver and simply slide out afterwards.

3.Take out the old battery and dispose of properly.

4.Gently place a new battery into the battery slot of the battery compartment, making sure that the poles are correctly placed.

5.Screw back the battery compartment, when finished as in the diagram below

16

Image 16
Contents Ultimate Fitness Experience Operated by 4 KeysBeneficiation Before Using the 3D Sensor 3D Sensor from GERMANY-MEASURES Your Movement Accuratly0KM 0MILES Steps 0KM 0MILESSpeed & Distance Heart Rate System with Daily Pedometer TipsContents Using the Watch FunctionsAVG Normal Walking MeasurementMode Flow Chart Configuring Personal InformationTime / Date Mode Alarm Mode Hour -Minute -Alarm On/OffCalibrate Speed & Distance Example For WalkingChronograph Mode Clock Time Pedometer Mode Pedometer User Setting Mode Pedometer Memory Recall Mode Walking Stride LengthHeart Rate / FAT / Calories Mode PC Link Communication Mode Downloading/Installing PC-Link ProgramPC-LINK Program Operation Installing the Battery WatchSpecifications Important Battery InformationHeart Rate Belt 3D sensor for step counting