Cateye MSC-2Dx user manual Memory Record Data Review, Download Memory Record Data

Page 22

SET/AT

MODE

LAP

SET/AT

SET/AT

MXP display

Memory record file screen

LAP

File selection

Memory record readout screen

MODE

Switching TM/DST

LAP

Downloading

Next point data

Memory record file screen

MXP display

Memory Record Data Review

Use the following procedure to review the data saved during Memory Record.

NOTE !: You cannot review the data while you are still recording to memory.

OFF	icon must be off.

TM

STOP "Elapsed Time TM" must not be running (Stop-state)

If icon is on, turn it off. In any mode or sub-mode press the Start/Stop button for two seconds.

1.Navigate so the lower display is Maximum Heart Rate MXP.

2.Push SET button to enter the Memory Record file screen.

3.Push LAP button to select the file to review. Switch file numbers by pressing the Lap button.

4.Push MODE button to enter the file.

icon appears and the screen starts replaying the recorded data from memory. TM icon flashes. By holding down MODE button, the lower display changes from Elapsed Time TM to Trip Distance Dst DST.

5.Push LAP (or MODE) button to advance to the next data point. This time interval is determined by the Record Interval you selected (5, 15, 30 or 60 seconds).

NOTE !: If you hold down LAP button for 2 seconds, the unit starts download- ing the data and the screen is fast forwarded automatically. The unit continues fast forwarding until the download is complete. If you have started downloading by mistake, stop it by pushing LAP button.

6.Push SET/AT button to return to the memory record file screen.

7.Push SET/AT button again, and the screen returns to Maximum Heart Rate MXP.

Download Memory Record Data

Ride data of heart rate, speed, time and distance can be downloaded into a PC. See the download manual for details.

MSC-2Dx 22

Image 22

Contents Introduction Meaning of icons in this manual Quick chart Inside Carry BagAbout the Manuals Quick Start manualContents Correct USE of the CAT EYE MSC-2Dx Main Unit AccessoriesName of Various Sections and Parts Chest Belt Heart Rate SensorSUB Function Mode Button ModeButton Navigation Lap Button LAPStart/Stop Button S/S Reset OperationSet Button SET/AT All Clear Button ACFunctions MxS Maximum Speed Lap CountAvS Average Speed Dst Trip DistanceBefore Wearing Chest Belt Heart Rate Sensor Using the Heart Rate FunctionChest Belt Heart Rate Sensor Maximum transmitting distance about 90 cmWearing the Heart Rate Sensor Setting the Main Unit Setting Wheel CircumferenceChecking Wheel Circumference Setting Clock TimeSwitching Between Wheel Circumference a and B Changing Wheel CircumferencesPower Saving Feature FeaturesAuto Time Feature Auto Start/Stop Speed Pace FeatureLap Data Read Out Lap FeatureRecording Lap Data Downloading Lap DataSetting Heart Rate Target Zones Heart Rate Target ZoneTime In Heart Rate Zone Setting Alarm SoundResetting Time In Heart Rate Zone Downloading Time In Training ZoneProcedure for Memory Record Take the following steps to record data to memoryIcon must be off Memory Record Interval SelectionCheck the Memory Record Files Icon must be turned offSetting up Memory Record Stop and Mode buttons simultaneouslyMemory Record On/Off Canceling Memory RecordTurning off icon before timing starts Download Memory Record Data Memory Record Data ReviewStop Elapsed Time TM must not be running Stop-state Memory Record How to downloadDownloading to a PC LapHeart Rate Training For improving your general fitnessFor competitors Trouble Shooting Clock setting screen does not appear Unit does not receive the heart rate signalYou cannot change the Interval Timer of memory record Heart rate display occasionally reads zeroMain Unit Replacing BatteryWireless Heart Rate Sensor CR2032Replacing Electrode Belt MaintenanceDaily Care of the MSC-2Dx Specifications Registration Phone 303-443-4595 FAXReplacement part AccessoriesOptional part Index Heart rate target Lap