Spirit XU875, XR895 owner manual Release Lever Assembly

Page 12

STEP 4: RELEASE LEVER ASSEMBLY

1.Run the Seat Recline Release Cable (58) under the Seat Back Frame (5).

2.Install the Gas Cylinder (57) into the bracket of the Seat Back Frame (5) with the 1pc of 5/16￿

x1-3/4￿ Hex Head Bolt (70), 1pc of 5/16￿ x 19 x 1.5T Flat Washer (76), 1pc of 5/16￿x 6T Nyloc Nut (91) by using the 13/14mm Wrench (130) and 13/15mm Wrench (113). Tighten the bolt until snug, but do not over tighten to the point of binding.

3.Remove the M6 Button Head Socket Screws holding the clamps of the left and right Release Levers (40) by using the Allen Wrench (115). Install the 2 Release Levers (40) onto the Handle Bar (6) just behind the hand pulse sensors. Install them at an angle that allows easy access for use, then install and tighten the socket screws removed earlier.

4.Secure the Seat Recline Release Cable (58) and the Seat Fore/Aft Release Cable (59) on the Handle Bar (6) by using the 4pcs of Velcro Tape. Wrap the tape around the handlebars in places that will be under the beverage holders, when they are installed, so they are out of sight.

5.Install the Beverage Holders (38 L, 39 R) on the Handle Bar (6) with the 4pcs of 4x16m/m Self Tapping Screws (105) by using the Phillips Head Screw Driver (114).

6.Install the Pedals (116 L, 117 R) in the Cranks by using the 13/15mm Wrench (113). Remember that the left pedal has a reverse thread and will be screwed into the crank in the opposite rotation from normal threads. There is an ￿￿￿ stamped into the end of the threaded post of the left pedal and an ￿￿￿ in the right. Make sure to tighten the pedals as much as you possibly can. It may be necessary to re-tighten the pedals if you feel a thumping during pedaling the bike. A noise or feeling such as a thumping or clicking is usually caused by the pedals being too loose.

11

XU875 & XR895

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Page Table of Contents Product Registration Important Safety Instructions Important Electrical Information Important Operation InstructionsAssembly Pack Check List XR895 StepStep Tools Assembly Instructions XR895 Rear Stabilizer & Seat Back AssemblyUnpacking the Unit Console Mast Assembly Seat & Handle BAR Assembly Release Lever Assembly Assembly Pack Check List XU875 #100 /14m/m Wrench 1 pc #92 /15m/m Wrench 1 pc Assembly Instructions XU875 Rear Stabilizer AssemblyFront Console Mast Assembly Handle BAR Assembly Console and Plastic Parts Assembly XU875 & XR895 Features Foot pedalsTransportation XR895 & XU875 Console Power on Operation of Your Stationary BikeQuick Start Basic informationEntering/Changing Settings Programming the consolePreset Programs ManualPrograms Fat BurnCardio Strength IntervalCustom User Defined Programs XU875 & XR895 XU875 & XR895 XU875 & XR895 Rate of Perceived Exertion Using a Heart Rate Transmitter Erratic OperationHeart Rate Control Program 1 & 2 HR 1, HR 2 operation Auto-pilotManufacturer’s Limited Warranty Bike Warranty

XU875, XR895 specifications

The Spirit XR895 and XR875 represent the latest in advanced drone technology, designed for various applications, including aerial photography, surveying, and inspections. These drones are engineered with a combination of robust features, cutting-edge technologies, and characteristics that make them stand out in the crowded UAV market.

The Spirit XR895 is known for its high-performance capabilities, featuring a powerful propulsion system that ensures stable flight even in challenging weather conditions. It is equipped with an advanced flight control system, which includes GPS positioning and automatic return-to-home features, enhancing safety and reliability during operation. Its maximum flight time can reach up to 40 minutes, allowing operators to cover extensive areas without needing frequent recharges.

On the other hand, the Spirit XR875 offers a slightly scaled-down version of the XR895, making it an ideal choice for users looking for a more compact and lightweight solution. Despite its smaller size, the XR875 does not compromise on performance, featuring similar flight stability technologies and a flight time of approximately 35 minutes. Its design focuses on user-friendliness, appealing to both amateur and professional drone users.

Both models are outfitted with high-definition cameras capable of capturing stunning 4K video and high-resolution image quality. The camera systems are stabilized using a three-axis gimbal, ensuring smooth footage even during flight maneuvers. This makes the Spirit XR895 and XR875 popular choices among filmmakers and photographers who require professional-level imaging.

In terms of connectivity, both drones feature enhanced wireless technology, allowing operators to maintain a strong signal over several kilometers. They support live video streaming, enabling real-time monitoring and adjustments during flights. Additionally, the drones are equipped with intelligent battery management systems that provide real-time telemetry data, helping users optimize their flight plans and ensure efficient battery usage.

Durability is another high point for the Spirit XR895 and XR875, as both drones are constructed using high-grade materials designed to withstand harsh environments. They come with various features, including obstacle detection sensors and rugged landing gear, to ensure safe operations even in complex terrains.

Overall, the Spirit XR895 and XR875 offer a perfect blend of performance, functionality, and reliability, making them excellent choices for a variety of aerial applications. Their innovative technologies and user-focused designs ensure they can meet the demands of both hobbyists and professionals alike.
Top Page Image Contents