STEP3:Seat & Handle Bar
1.Install the Seat (61) on the Seat Carriage (4) with four Phillips Head Screws (98).Tighten with the Phillips Head Screw Driver (114).
2.Attach the Seat Handle Bar (6) to the Seat Carriage (4) with the four Hex Head Bolts (71), four Flat Washers (77), and four Nyloc Nuts (89).Tighten with the wrenches provided (112 & 132).
3.Plug the Hand Pulse Sensor Cables (27) into the left side of the rear plastic cover.
HARDWARE
#98. M6 x 15mm | #89. 3/8” x 7T | #77. 3/8” x 19 x 1.5T | #71. 3/8” x |
Phillips Head Screw | Nyloc Nut | Flat Washer | Hex Head Bolt |
(4 pcs) | ( 4 Pcs) | (4 pcs) | ( 4 Pcs) |
|
| 7 | XBR25 Fitness Bike |