Quick Start
This is the quickest way to start a workout. After the console powers up you just press the Start key to begin, this will initiate the Quick Start mode. In Quick Start the Time will count up from zero and the workload may be adjusted manually by pressing the Level Up/ Down buttons.The dot matrix display will have only the bottom row lit at first. As you increase the work load more rows will light indicating
a harder workout.The fitness bike will get harder to pedal as the rows increase.
There are 20 levels of resistance available for plenty of variety.The first 5 levels are very easy workloads and the changes between levels are set to a good progression for
Basic Information
The Message Center will initially be displaying the Program name. When in scan mode during a program, speed will be displayed for four seconds, then move on and display Watts (indication of workload). If
100 watts is displayed, you are doing enough work to keep a
the beginning.
The Stop button actually has several functions. Pressing the Stop key once during a program will pause the program for 5 minutes. If you need to get a drink, answer the phone or any of the many things that could interrupt your workout, this is a great feature.To resume your workout during Pause, just press the Start key. If the Stop button is
pressed twice during a workout, the program will end and the console will display your Workout Summary (Total time, Avg. Speed, Avg.Watts, Avg. HR, total Laps). If the Stop key is held down for 3 seconds or a third time during the program, the console will perform a complete Reset. During data entry for a program the Stop key performs a previous screen or segment function.This allows you to go back to change programming data.
11 | XBR25 Fitness Bike |