Spirit XBR25 owner manual Heart Rate Program Operation

Page 23

Heart Rate Program Operation

Note:You must wear the heart rate transmitter strap for this program

The Heart Rate program default setting is 60% of your projected maximum heart rate. The 60-80% range is more conducive for fat loss goals and 81-100% ranges are generally used for cardiovascular conditioning goals and high intensity interval training.

To start the program follow the instructions below or just press the HR key, then press the Enter button and follow the directions in the Message Center.

After selecting your heart rate target the program will attempt to keep you at or within 3-5 heart beats per minute of this value. Follow the prompts in the Message Center to maintain your selected heart rate value.

1.Press the HR key then press the Enter key.

2.The Message Center will ask you to enter your Age.You may enter your age, using the Level Up/Down keys, then press the Enter key to accept the new value and proceed on to the next screen.

3.You are now asked to enter your Weight.You may adjust the weight value using the Level Up/Down keys, then press Enter to continue.

4.Next is Time.You may adjust the time and press Enter to continue.

5.Now you are asked to adjust the Heart Rate Target.This is the heart rate level you will strive to maintain during the program. Adjust the level using the Level Up/Down keys,

then press Enter. Note:The heart rate that appears is based on the % you accepted in Step 1. If you

change this number it will either increase or decrease the % from Step 1.

6. Now you are finished editing the settings and can begin your workout by pressing the Start key.You can also go back and modify your settings by pressing the Enter key.

Note: At any time during the editing of Data you can press the Enter key to go back one screen.

7.If you want to increase or decrease the workload at any time during the program press the Level Up/Down key.This will allow you to change your target heart rate at any time during the program.

8.During the HR program you will be able to scroll through the data in the Message Center by pressing the Enter key.

9.When the program ends you may press Start to begin the same program again or Stop to exit the program.

19

XBR25 Fitness Bike

Image 23
Contents XBR25 Fitness Bike Page Table of Contents XBR25 Fitness Bike Product Registration Determining heart rate trends in general Important Safety InstructionsImporant Operation Instructions Important Electrical InstructionsAssembly Tools XBR25 Assembly InstructionsAssembly Video Pre-Assembly Hardware Rear Stabilizer & Seat BackConsole Mast Seat & Handle Bar Plastic Parts Transportation Product FeaturesSeat Adjustability FootpadsXBR25Console PowerOperation of Your Console Basic Information Quick StartProgramming The Console Entering a Program And Changing SettingsProgram Keys Manual Hill Preset ProgramsProgramming Preset Programs You can decide upon which goal you would like to pursue Heart Rate ProgramsRate of Perceived Exertion Erratic Operation Using a Heart Rate TransmitterWearing The Chest Strap Heart Rate Program Operation Engineering Mode Menu General MaintenanceFitness Bike Warranty Effective September 15 Manufacturer’s Limited WarrantyAll Rights Reserved Rev