12.Plug the Pulse Bar Pulse Wire (72) into the Frame Pulse Receptacle (75) located in the Left Seat Shield (24).
13.Identify the Right Pedal (16).
Using an adjustable wrench, firmly tighten the Right Pedal (16) clockwise into the Right Crank Arm (17).
Firmly tighten the Left Pedal (not shown) counterclockwise into the Left Crank Arm (not shown).
Adjust the right strap to the desired position, and press the ends of the strap onto the tabs on the Right Pedal (16). Adjust the strap on the Left
Pedal (not shown) in the same way.
12 |
75 |
72 |
24 |
13 |
17
Strap
16
Tab
11