Sears NTEX03912.0 user manual

5.Tip: Avoid pinching the wires. Attach the Handlebar (6) to the Upright (4) with four M6 x 20mm Screws (88) and four M6 Split Washers (50).

6.Insert the Main Wire (76) and the Frame Pulse Wire (75) upward through the indicated hole in the Upright (4).

7.While a second person holds the Console (7) near the Upright (4), connect the wires on the Console to the Main Wire (76) and the Frame Pulse Wire (75).

Insert the excess wire into the Upright (4) or into the Console (7).

Tip: Avoid pinching the wires. Attach the Console (7) to the Upright (4) with four M4 x 16mm Screws (56).

5
	Avoid pinching
		the wires
6	4
	50
	88
6
	4
	75
	76
7
7	4	56
	75
	76

Avoid pinching

the wires

8