3.AttachtheLeftandRightUprightCovers(14,15) aroundtheFrame(1)withthreeM4x 25mmRound HeadScrews(41)asshown.
4. AttachtheSeat(12)to theSeatPost(5)withfour M8SplitWashers(42)andfourM8Nylon Locknuts(10).Note:TheSplitWashersandthe
Nylon Locknuts may be
5.Turn the Seat Knob (9) counterclockwise and remove it from the Frame (1). Next, insert the Seat Post (5) into the Frame. Adjust the Seat Post to the desired height and insert the Seat Knob (9) through the indi- cated hole in the Frame into one of the adjustment holes in the Seat Post. Then, turn the Seat Knob clockwise until it is tight. Make sure the Seat Knob is firmly engaged in one of the adjustment holes in the Seat Post,
15
10
ustment Holes